Catalog

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA

This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€1,060.00

6SC6100-0GA00 - Power supply board - SIEMENS

6SC6100-0GA00

This SIEMENS power supply board and 6SC6100-0GA00 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GA00 SIEMENS SIMODRIVE 610/210 VSA FBG. FEEDING AND MONITORING This 6SC6100-0GA00 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board refurbished and tested on...

€850.00

6SC6100-0GB11 - Power supply board - SIEMENS

6SC6100-0GB11

This SIEMENS power supply board and 6SC6100-0GB11 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GB11 SIEMENS SIMODRIVE 610/210 VSA FBG ELECTRICAL POWER SUPPLY AND VOLTAGE LIMITATION This 6SC6100-0GB11 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board...

€520.00

CP10G-04 - HMI terminal - EXOR

CP10G-04

This EXOR reference CP10G-04 HMI screen is part of the UniOP series. CP10G-04: 24V; Monochrome LCD screen; memory: 16KB. This EXOR terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Device 100% tested.

€790.00

6AU1445-0AA00-0AA0 - Motion control system - SIEMENS

6AU1445-0AA00-0AA0

This SIEMENS motion control system bears the reference 6AU1445-0AA00-0AA0. It corresponds to the SIEMENS - SIMOTION D445 range SIMOTION DRIVE-BASED CONTROL UNIT D445; PROGRAMMABLE MOTION CONTROL; HIGH PERFORMANCE; INTERFACES: 8 DI, 8 DI/DI, 6 DRIVE-CLIQ, 2 PROFIBUS, 2 ETHERNET, 2 USB, 1 OPTION SLOT; FAN/BATTERY MODULE AND BATTERY INCL. SIEMENS motion...

€6,520.00