Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Catalog

73-552-0005 - Power Supply - ASTEC

73-552-0005
This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330
This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.
€520.00

BSM90N-175AA - Servo Motor brushless - BALDOR

BSM90N-175AA
This reference motor BSM90N-175AA and brand BALDOR is a Brushless motor AC.Gamme C series TORQ CONT STALL: 6 NM, CUR CONT STALL / AT RMS: 8.07, POWER: 0.53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: 300, PEAK CUR / AT RMS: 29.05, MAX MECH SPEED 6000 This BALDOR Engine is at your disposal to replace your equipment and has a guarantee adapted to your needs
€1,060.00

RS1A03AA - Servo Amplifier - SANYO DENKI

RS1A03AA
This reference RS1A03AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A03AA : INPUT: 3x230 V, 5.8A ; OUTPUT: 5.2A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€630.00

RS1A01AA - Servo Amplifier - SANYO DENKI

RS1A01AA
This reference RS1A01AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A01AA: INPUT: 3x230 V, 2.5A ; OUTPUT: 2.5A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€360.00

RS1A05AA - Servo Amplifier - SANYO DENKI

RS1A05AA
This reference RS1A05AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A05AA: INPUT: 3x230 V, 13.3A ; OUTPUT: 12A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€690.00

RS1L05AA - Servo Amplifier - SANYO DENKI

RS1L05AA
This reference RS1L05AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L05AA: INPUT: 3x230 V, 13.3A ; OUTPUT: 12A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€760.00

RS1L01AA - Servo Amplifier - SANYO DENKI

RS1L01AA
This reference RS1L01AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L01AA: INPUT: 3x230 V, 2.5A ; OUTPUT: 2.5A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€580.00

RS1L03AA - Servo Amplifier - SANYO DENKI

RS1L03AA
This reference RS1L03AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L03AA: INPUT: 3x230 V, 5.8A ; OUTPUT: 5.2A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€680.00

CJ1W-II101 - Interface module - OMRON

CJ1W-II101
This OMRON brand module and reference CJ1W-II101 belongs to the CJ1W-IC/II range. Features: An I/O interface unit is required on each expansion rack. Connection cable: extension connection cable. Climb up to the right of the power supply. This OMRON module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€99.00

CJ1W-IC101 - Control unit - OMRON

CJ1W-IC101
This OMRON brand module and reference CJ1W-IC101 belongs to the CJ1W-IC/II range. Features: Mount one I/O Control Unit on the CPU Rack when connecting one or more Expansion Racks. Connecting Cable: Expansion Connecting Cable Connected Unit: CJ1W-II101 I/O Interface Unit Mount to the right of the CPU Unit. This OMRON module is at your disposal to replace...
€99.00