Catalog

Showing 1-36 of 54 item(s)

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

FX3-CPU000000 - Security module - SICK

FX3-CPU000000

This FX3-CPU000000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 24Vdc, category 4. Main module sold without system connector (FX3-MPL000001) This FX3-CPU000000 module from SICK is at your disposal to replace your defective hardware.

€499.00

FX3-MPL000001 - Connector for security module - SICK

FX3-MPL000001

This connector for main module FX3-MPL000001 from the Flexi Soft range is for FX3-CPU0 or FX3-CPU1 modules. System connector: Flexi-Soft system power supply and save system configuration (without EFI-enabled devices). screw terminal blocks This FX3-MPL000001 connector from SICK is at your disposal to replace your defective equipment.

€125.00

FX3-XTDI80002 - I/O module - SICK

FX3-XTDI80002

This FX3-XTDI80002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 8 outputs. Category 4 This FX3-XTDI80002 module from SICK is at your disposal to replace your defective hardware.

€155.00

FX0-GCAN00000 - Security module - SICK

FX0-GCAN00000

This FX0-GCAN00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). CANOPEN fieldbus, powered by Flexibus+ This FX0-GCAN00000 module from SICK is at your disposal to replace your defective equipment.

€980.00

FX0-GENT00000 - Security module - SICK

FX0-GENT00000

This FX0-GENT00000 main module from the Flexi Soft range is configurable by software (Flexi Soft Designer). ETHERNET fieldbus, powered by Flexibus+ This FX0-GENT00000 module from SICK is at your disposal to replace your defective equipment.

€1,175.00

FX3-XTIO84002 - I/O module - SICK

FX3-XTIO84002

This FX3-XTIO84002 input/output module from the Flexi Soft range is configurable by software (Flexi Soft Designer). 8 inputs and 6 outputs. Category 4 This FX3-XTIO84002 module from SICK is at your disposal to replace your defective hardware.

€495.00

SGDS-02A12A - Servo drive - YASKAWA

SGDS-02A12A

This YASKAWA servopack has the reference SGDS-02A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 100-115/200-230V, 1 PH, 50/60Hz, 6.5A, 0.2kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€155.00

SGDS-08A12A - Servo drive - YASKAWA

SGDS-08A12A

This YASKAWA servopack has the reference SGDS-08A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 1 PH, 50/60Hz, 5.5A, 0.75kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€660.00

SGDS-A5A12A - Servo drive - YASKAWA

SGDS-A5A12A

This YASKAWA servopack has the reference SGDS-A5A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 100-115/200-230V, 1 PH, 50/60Hz, 2.1A, 0.05kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€150.00

SGDS-01A12A - Servo drive - YASKAWA

SGDS-01A12A

This YASKAWA servopack has the reference SGDS-01A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 100-115/200-230V, 1 PH, 50/60Hz, 2.8A, 0.1kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€270.00

SGDS-04A12A - Servo drive - YASKAWA

SGDS-04A12A

This YASKAWA servopack has the reference SGDS-04A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 100-115/200-230V, 1 PH, 50/60Hz, 8.5A, 0.4kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€270.00

SGDS-05A12A - Servo drive - YASKAWA

SGDS-05A12A

This YASKAWA servopack has the reference SGDS-05A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 11A, 0.5kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,300.00

SGDS-10A12A - Servo drive - YASKAWA

SGDS-10A12A

This YASKAWA servopack has the reference SGDS-10A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 17A, 1kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,290.00

SGDS-15A12A - Servo drive - YASKAWA

SGDS-15A12A

This YASKAWA servopack has the reference SGDS-15A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 28A, 1.5kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,140.00

SGDS-20A12A - Servo drive - YASKAWA

SGDS-20A12A

This YASKAWA servopack has the reference SGDS-20A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 42A, 2kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,300.00

SGDS-30A12A - Servo drive - YASKAWA

SGDS-30A12A

This YASKAWA servopack has the reference SGDS-30A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 56A, 3kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,320.00

SGDS-50A12A - Servo drive - YASKAWA

SGDS-50A12A

This YASKAWA servopack has the reference SGDS-50A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 84A, 5kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€700.00

SGDS-60A12A - Servo drive - YASKAWA

SGDS-60A12A

This YASKAWA servopack has the reference SGDS-60A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 110A, 6kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€5,700.00

SGDS-75A12A - Servo drive - YASKAWA

SGDS-75A12A

This YASKAWA servopack has the reference SGDS-75A12A. It corresponds to the range of YASKAWA SIGMA-III servo drives. Servo drive : Input: 200-230V, 3 PH, 50/60Hz, 130A, 7.5kW YASKAWA servo motor reconditioned and tested on the bench manufacturer (100% test)

€1,710.00

3G3MV-AB001 - Servodrive - OMRON

3G3MV-AB001

This OMRON drive and reference 3G3MV-AB001 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 0.10kW, 0.8A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€380.00

3G3MV-AB002 - Servodrive - OMRON

3G3MV-AB002

This OMRON drive and reference 3G3MV-AB002 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 0.25kW, 1.6A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€250.00

3G3MV-AB004 - Servodrive - OMRON

3G3MV-AB004

This OMRON drive and reference 3G3MV-AB004 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 0.55kW, 3A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€140.00

3G3MV-AB007 - Servodrive - OMRON

3G3MV-AB007

This OMRON drive and reference 3G3MV-AB007 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 1.1kW, 5A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€315.00

3G3MV-AB015 - Servodrive - OMRON

3G3MV-AB015

This OMRON drive and reference 3G3MV-AB015 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 1.5kW, 8A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€950.00

3G3MV-AB022 - Servodrive - OMRON

3G3MV-AB022

This OMRON drive and reference 3G3MV-AB022 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 2.2kW, 11A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€630.00

3G3MV-AB040 - Servodrive - OMRON

3G3MV-AB040

This OMRON drive and reference 3G3MV-AB040 is part of the 3G3MV series. Characteristics: Single phase 200/240V AC, 4kW, 17.5A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€2,800.00

3G3MV-A2001 - Servodrive - OMRON

3G3MV-A2001

This OMRON drive and reference 3G3MV-A2001 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 0.10kW, 0.8A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€160.00

3G3MV-A2002 - Servodrive - OMRON

3G3MV-A2002

This OMRON drive and reference 3G3MV-A2002 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 0.25kW, 1.6A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€170.00

3G3MV-A2004 - Servodrive - OMRON

3G3MV-A2004

This OMRON drive and reference 3G3MV-A2004 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 0.55kW, 3A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€230.00

3G3MV-A2007 - Servodrive - OMRON

3G3MV-A2007

This OMRON drive and reference 3G3MV-A2007 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 1.1kW, 5A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€240.00

3G3MV-A2015 - Servodrive - OMRON

3G3MV-A2015

This OMRON drive and reference 3G3MV-A2015 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 1.5kW, 8A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€420.00

3G3MV-A2022 - Servodrive - OMRON

3G3MV-A2022

This OMRON drive and reference 3G3MV-A2022 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 2.2kW, 11A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€560.00

3G3MV-A2040 - Servodrive - OMRON

3G3MV-A2040

This OMRON drive and reference 3G3MV-A2040 is part of the 3G3MV series. Characteristics: Three phase 200/240V AC, 4kW, 17.5A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€300.00

3G3MV-A4002 - Servodrive - OMRON

3G3MV-A4002

This OMRON drive and reference 3G3MV-A4002 is part of the 3G3MV series.Characteristics: Three-phase 400V AC, 0.37kW, 1.2AThis OMRON drive is at your disposal to replace your defective equipment.Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€190.00

3G3MV-A4004 - Servodrive - OMRON

3G3MV-A4004

This OMRON drive and reference 3G3MV-A4004 is part of the 3G3MV series. Characteristics: Three-phase 400V AC, 0.55kW, 1.8A This OMRON drive is at your disposal to replace your defective equipment. Drive reconditioned and tested under full load (duration test) on an OMRON bench.

€265.00