Catalog

Showing 1-36 of 47 item(s)

1746-IB16 - Digital Input Module - ALLEN BRADLEY

1746-IB16

This 1746-IB16 and ALLEN BRADLEY reference digital input module is a 16 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 24V DC signal output. 16 entries. 8mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€53.00

1746-OB16 - Digital Ouput Module - ALLEN BRADLEY

1746-OB16

This 1746-OB16 and ALLEN BRADLEY reference digital output module is a module with 16 digital outputs for the SLC 500 range. SLC 500, DIGITAL OUTPUT 24V DC signal output. 16 outputs. 0.280A. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€40.00

1746-P2 - Power Supply Module - ALLEN BRADLEY

1746-P2

This 1746-P2 and ALLEN BRADLEY brand power supply module is part of the SLC 500 range. Line Voltage: 85-132 VAC / 170-265 VAC, 50/60 Hz. Fuse replacement 250V / 3A. This 1746-P2 power supply module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€235.00

TC3000 - Thyristor power unit - EUROTHERM

TC3000

EUROTHERM reference 100A / 400V thyristor power unit TC3000 for the control of electric power on three-phase industrial loads. This EUROTHERM dimmer is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Dimmer refurbished and tested under full load (100% test).

€1,720.00

1746-OW16 - Digital Ouput Module - ALLEN BRADLEY

1746-OW16

This 1746-OW16 and ALLEN BRADLEY reference digital output module is a 16 digital output module for the SLC 500 range. SLC 500, DIGITAL OUTPUT MODULE AC / DC signal output. 16 outputs. 0.280A. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€65.00

1746-NI8 - Analog Input Module - ALLEN BRADLEY

1746-NI8

This 1746-NI8 and ALLEN BRADLEY analog input module is an 8-input analog module for the SLC 500 series. SLC 500, ANALOG INPUTS 24V DC signal input. 8 entries. 200mA at 5V dc or 100mA at 24V dc. This ALLEN BRADLEY input module is at your disposal to replace your defective equipment and has a guarantee.

€465.00

On sale!

1746-IB32 - Digital Input Module - ALLEN BRADLEY

1746-IB32

This 1746-IB32 and ALLEN BRADLEY reference digital input module is a 32 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 24V DC signal output. 32 entries. 5.1mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€65.00

On sale!

1746-IB8 - Digital Input Module - ALLEN BRADLEY

1746-IB8

This 1746-IB8 and ALLEN BRADLEY reference digital input module is a 8 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 24V DC signal output. 8 entries. 8mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€85.00

On sale!

1746-ITB16 - Digital Input Module - ALLEN BRADLEY

1746-ITB16

This 1746-ITB16 and ALLEN BRADLEY reference digital input module is a 16 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 24V DC signal output. 16 entries. 8mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€94.00

On sale!

1746-IC16 - Digital Input Module - ALLEN BRADLEY

1746-IC16

This 1746-IC16 and ALLEN BRADLEY reference digital input module is a 16 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 48V DC signal output. 16 entries. 4.1mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€235.00

On sale!

1746-IH16 - Digital Input Module - ALLEN BRADLEY

1746-IH16

This 1746-IC16 and ALLEN BRADLEY reference digital input module is a 16 digital input module for the SLC 500 range. SLC 500, DIGITAL INPUT 125V DC signal output. 16 entries. 2,15mA. This ALLEN BRADLEY module is at your disposal to replace your defective equipment and has a guarantee.

€215.00

BWU2702 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2702

This BIHL+WIEDEMANN brand BWU2702 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€805.00

BWU2822 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2822

This BIHL+WIEDEMANN brand BWU2822 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi-3 masters, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 62 2-channel safety...

€1,450.00

BWU2793 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2793

This BIHL+WIEDEMANN brand BWU2793 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, ASi current measurement in the gateway, 6 discrete inputs or 3 2-channel safety inputs (SIL 3, cat. 4), expandable to 31 2-channel safety...

€350.00

BWU2602 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2602

This BIHL+WIEDEMANN brand BWU2602 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 1922 2-channel safety inputs in max configuration, 4 circuits (2 x relay outputs and 2 x...

€1,200.00

BWU2202 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2202

This BIHL+WIEDEMANN brand BWU2202 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 2 ASi masters, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) safety outputs), expandable to 16...

€840.00

BWU2204 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2204

This BIHL+WIEDEMANN brand BWU2204 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, 4 discrete inputs, expandable to 62 2-channel safety inputs, 4 enabling circuits (2 x relay outputs and 2 x signal outputs) electronic safety devices),...

€650.00

BWU2206 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU2206

This BIHL+WIEDEMANN brand BWU2206 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range ASi-3 PROFIBUS gateway with integrated safety monitor, 1 ASi master, 1 power supply for 2 ASi circuits, expandable to 62 2-channel safety inputs, 2 enable circuits (2 x 2 relay outputs), expandable to 16 safety outputs , diagnostics and configuration via Ethernet...

€250.00

BWU3053 - PROFIBUS safety module - BIHL+WIEDEMANN

BWU3053

This BIHL+WIEDEMANN brand BWU3053 gateway module is from the AS-i 3.0 PROFIBUS-Gateways range 24 volt ASi-3 PROFIBUS gateway in stainless steel, 1 ASi-3 master, integrated decoupling, max. 4 A per ASi circuit, duplicate address detection, ASi fault check, IP20 This BIHL+WIEDEMANN brand BWU3053 module is at your disposal to replace your defective equipment.

€1,900.00

FBS 4008/B - Servo Converter - STÖBER

FBS 4008/B

This servo motor reference FBS 4008/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FBS 4008/B: N+1x230V, 0.37kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€840.00

FBS 4013/B - Servo Converter - STÖBER

FBS 4013/B

This servo motor reference FBS 4013/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FBS 4013/B: N+1x230V, 0.75kW, 3.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,980.00

FDS 4014/B - Servo Converter - STÖBER

FDS 4014/B

This servo motor reference FDS 4014/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4014/B: 3x400V, 0.75kW, 2.1A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,775.00

FDS 4024/B - Servo Converter - STÖBER

FDS 4024/B

This servo motor reference FDS 4024/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4024/B: 3x400V, 1.5kW, 3.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,230.00

FBS 4028/B - Servo Converter - STÖBER

FBS 4028/B

This servo motor reference FBS 4028/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FBS 4028/B: N+1x230V, 1.5kW, 7A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€580.00

FDS 4040/B - Servo Converter - STÖBER

FDS 4040/B

This servo motor reference FDS 4040/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4040/B: 3x400V, 2.2kW, 5.5A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

FDS 4070/B - Servo Converter - STÖBER

FDS 4070/B

This servo motor reference FDS 4070/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4070/B: 3x400V, 4kW, 10A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,440.00

FDS 4085/B - Servo Converter - STÖBER

FDS 4085/B

This servo motor reference FDS 4085/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4085/B: 3x400V, 5.5kW, 12A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€1,660.00

FDS 4110/B - Servo Converter - STÖBER

FDS 4110/B

This servo motor reference FDS 4110/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4110/B: 3x400V, 7.5kW, 16A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,445.00

FDS 4150/B - Servo Converter - STÖBER

FDS 4150/B

This servo motor reference FDS 4150/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4150/B: 3x400V, 11kW, 22A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,520.00

FDS 4220/B - Servo Converter - STÖBER

FDS 4220/B

This servo motor reference FDS 4220/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4220/B: 3x400V, 15kW, 32A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,950.00

FDS 4270/B - Servo Converter - STÖBER

FDS 4270/B

This servo motor reference FDS 4270/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4270/B: 3x400V, 18.5kW, 39A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,530.00

FDS 4300/B - Servo Converter - STÖBER

FDS 4300/B

This servo motor reference FDS 4300/B and Stöber brand is a drive from the POSIDRIVE FDS 4000 range. FDS 4300/B: 3x400V, 22kW, 44A. This Stöber servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,575.00

MP25A4R - DC drive - CONTROL TECHNIQUES

MP25A4R

This variable speed drive for DC motor reference MP25A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 25A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€2,520.00

MP45A4R - DC drive - CONTROL TECHNIQUES

MP45A4R

This variable speed drive for DC motor reference MP45A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 45A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€5,600.00

MP75A4R - DC drive - CONTROL TECHNIQUES

MP75A4R

This variable speed drive for DC motor reference MP75A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 75A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€3,900.00

MP105A4R - DC drive - CONTROL TECHNIQUES

MP105A4R

This variable speed drive for DC motor reference MP105A4R and brand Control Techniques is a drive from the MENTOR MP range. Characteristics: 24 to 480V, excitation current: 8A, armature current: 105A This Control Techniques drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.

€7,000.00