Catalog

ROD426 250 03S12-03 - Encoder - HEIDENHAIN

ROD426 250 03S12-03

This rotary encoder HEIDENHAIN ROD426 250 03S12-03 is an encoder with integrated bearing for separate shaft coupling. This HEIDENHAIN encoder belongs to the ROD426 range. It has 250 points for rotary measurement of an axis or motor. This HEIDENHAIN encoder is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€315.00

DBSC102-GAAW - Servo Controller - BALDOR

DBSC102-GAAW

This reference drive DBSC102-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 1PH, Output: 2A/ACO-230V, RS232 interface, binary encoder simulation, 0.87kVA. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

DBSC1110-GAAW - Servo Controller - BALDOR

DBSC1110-GAAW

This reference drive DBSC1110-GAAW and brand BALDOR is a servo controller for Brushless AC motor. Input: AC230V 50/60Hz, 3PH, Output: 10A/ACO-250V, RS232 interface, binary encoder simulation. This BALDOR servo controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€580.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

FPH4A02TB-RN23 - Servo drive - BALDOR

FPH4A02TB-RN23

This reference servo drive FPH4A02TB-RN23 and brand BALDOR is a servo drive for Brushless AC motor. Flex + Drive II range. Desc: F + DII-415V / 2.5A / 24V / DB / Res Input: AC400-480V 50/60Hz, Three Phase Output: 2.5A / ACO-460V This BALDOR servo drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€710.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

NT620C-ST141-E - Programmable Terminal - OMRON

NT620C-ST141-E

This reference terminal NT620C-ST141-E and brand OMRON is an interactive display panel. Series NT620S/620C. Terminal STN color LCD type (with backlight). 640 x 480 dots.32 x 24 switches. This OMRON terminal is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€1,310.00

S3D8-CKF - Sensor Controller - OMRON

S3D8-CKF

This sensor controller OMRON and reference S3D8-CKF belongs to the range S3D8. Controller with 8 inputs and 8 outputs (4 contacts + 4 transistors). Memory in an eeprom. This S3D8-CKF controller is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€140.00

C200H-OC226N - Output Module - OMRON

C200H-OC226N

This OMRON brand and C200H-OC226N output module reference belongs to the CS1 range. Output module: AC 250V / DC 24V 2A / POINT 8A / UNIT. 1 phase This output module C200H-OC226N is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€245.00

C200H-CP114 - Cam positionner module - OMRON

C200H-CP114

This camera positioning module of OMRON brand and reference C200H-CP114 belongs to the range CS1. Module: 48 cam outputs (16 external outputs, 32 internal). Resolver speed: 20 ms (5 Khz) This output module C200H-OC226N is available to replace your defective hardware and has a warranty adapted to your needs.

€240.00