6ES7158-3AD01-0XA0 - PN/PN Coupleur Module - SIEMENS
This reference coupling module 6ES7158-3AD01-0XA0 and SIEMENS is a module for the SIMATIC range.
SIMATIC DP, PN / PN coupler Coupling module for connecting two PROFINET networks. Transmission via the PROFIsafe redundant power supply
This SIEMENS module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
You can use the SIMATIC Automation Tool to perform commissioning and maintenance activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of the TIA Portal. The SIMATIC Automation Tool provides a multitude of functions:
● Scanning of a PROFINET/Ethernet system network and identification of all connected CPUs
● Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a CPU
● Transfer of the date and the programming device/PC time converted to UTC time to the module
● Program download to CPU
● RUN/STOP mode switchover
● CPU localization by means of LED flashing
● Reading out of CPU error information
● Reading of the CPU diagnostic buffer
● Reset to factory settings
● Firmware update of the CPU and connected modules
Data coupling as firmware vezrsion 4.0 over two additional operatidule operating modes
The new PN/PN Coupler, firmware version V4.0, offers stronger decoupled data transmission between the two network sides. This provides the following advantages:
● Flexible adaptation of the diagnostic options to the different applications
● Free configuration of the response to communication interruptions on the other network side depending on the requirements
● Easier coupling with third-party systems In the configuration, this module operating mode is referred to as "IO Modules". It is best to use this module operating mode for new projects.
If necessary, you can also configure the previous operating mode (up to FW version V3.x, 6ES7158-3AD00-0XA0 or 6ES7158-3AD01-0XA0) with closer coupling of the two network sides, for example, to extend existing projects, for spare parts.
In the configuration this module operating mode is referred to as "IO Modules
Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.