SM-INTERBUS - Interface module - CONTROL TECHNIQUES
This interface module SM-INTERBUS from Control Techniques is a programming console from the UNIDRIVE range.
Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives.
This SM-INTERBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
SM-INTERBUS
The SM-INTERBUS is a Solutions Module that can be fitted to any one of the expansion slots in the Unidrive SP, Commander SK, Digitax ST and Mentor MP. The SMINTERBUS uses a 16-bit processor and communicates at either 500 Kbits/s or 2 Mbits/s.
The SM-INTERBUS is powered from the drive’s internal power supply. The drive can be connected to a back-up power supply. This keeps the control electronics and options powered up, allowing the SM INTERBUS to continue communicating with the INTERBUS master controller when the main supply to the drive is switched off.
General specification
• 1 to 10 input/output cyclic data words (16-bit) supported
• PCP V2.0, CT Single Word or PPO 4 Word mode non-cyclic data channel (optional)
Solutions Module identification
The SM-INTERBUS can be identified by:
1. The label located on the underside of the Solutions Module.
2. The color coding across the front of the SM-INTERBUS (Grey).
Control Techniques is a leading manufacturer of AC and DC speed variation, servo motors and power conversion technologies for commercial and industrial applications. Their innovative products are used in the most demanding applications, requiring performance, reliability and energy efficiency.
Nidec Control Techniques has been at the forefront of industrial-driven drive technology for more than 40 years. They are dedicated to the advancement of automation. From product development to their headquarters to their 45 automation centers around the world, Nidec Control Techniques provides industry-relevant solutions. They guarantee high performance, reliability and energy efficiency in all applications.