Hello, our Live Chat is active. Contact us right now.
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS
6FC5357-0BB11-0AE1 - NCU Module - SIEMENS

6FC5357-0BB11-0AE1 - NCU Module - SIEMENS

6FC5357-0BB11-0AE1

This NCU 6FC5357-0BB11-0AE1 and SIEMENS is a numeric control unit of the SINUMERIK 840D range.

SINUMERIK 840DE NCU 571.3 SOFTWARE MEMORY SYSTEM: NC 0.5 MB, API 96 KB PREP. PROFIBUS-DP.

This NCU 6FC5357-0BB11-0AE1 SIEMENS is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Supply
Warranty
€830.00
VAT excluded

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The components of the SINUMERIK 840D are compatible with the module se- ries SIMODRIVE 611D. The 840D is operated with the power supply of SIMODRIVE 611 and the SIMODRIVE 611D drive modules.
The NCU module (Numeric Control Unit) is the CPU of the SINUMERIK 840D. It takes over all the CNC, PLC and communication tasks

The NCU box is the module rack of the NCU module and consists of:
- NC rack assembly with cable distributor
- Battery/fan slide-in module
- Sheet metal housing with integrated guide bars for accommodating the NCU and the fan/battery slide-in modules and power supply unit.

The fan box is absolutely required for the 573.3 (Pentium III) and 573.4 (Pen- tium III) NCUs. Mount the fan box to the NCU box if necessary.

As a submodule of the NCU, the PLC module supports machine monitoring and represents a PLC-CPU that is compatible to the S7-300 family of products. Via the P bus, three external lines can be connected for every eight S7-300 periph- eral modules.

The COM module is a submodule of the NCU. It is used for communication with the PCU and peripherals.

The driver module is a submodule of the NCU (...-...-0AEx). It forms the inter- face to the operator panel front, to the programming device, to the decentralized peripherals and to S7-300 peripherals.

The NCU contains a plug-in unit for standard PCMCIA cards (PC card or NC card), via which all flash cards of type II up to 8 MB storage capacity can be operated.
The PCMCIA card serves as a bulk memory for the NC system software (NC card).

Height
32 cm / 12,5 in
Width
14 cm / 5,5 in
Length
5 cm / 1,9 in
Weight
0,7 kg / 1,5 lb
Family
SINUMERIK
Reference
6FC5357-0BB11-0AE1
Refurbished
3007283556986
300673367722

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

16 other products in the same category: