Catalog

TSXDMZ64DTK - I/O Module - SCHNEIDER

TSXDMZ64DTK

This module of TELEMECANIQUE and reference TSXDMZ64DTK belongs to the range Modicon TSX Micro. Module with 64 inputs / outputs. Equipped with 4 male HE10 connectors. 32 inputs 24VDC and 32 static outputs 24VDC / 0.1A. This Telemecanique TSXDMZ64DTK module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€100.00

TSX3721001 - PLC - SCHNEIDER ELECTRIC

TSX3721001

Schneider PLC / Telemecanique reference TSX3721001. Modicon PLC Micro. TSX micro 3721 100/240 V AC base This Schneider TSX3721001 is at your disposal to replace your defective equipment and has a warranty adapted to your needs. PLC SCHNEIDER reconditioned and tested under full load (duration test) on TSX Micro Modicon bench.

€330.00

TSXDSZ08R5 - Output module - TELEMECANIQUE

TSXDSZ08R5

This TELEMECANIQUE and TSXDSZ08R5 output module belongs to the Modicon TSX Micro range. Module with 8 relay outputs. Screw connection with 15 terminals. 24VDC or 24 ... 240VAC This Telemecanique TSXDSZ08R5 output module is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€125.00

TSXDMZ28DR - Relay I/O Module base - TELEMECANIQUE

TSXDMZ28DR

This module of TELEMECANIQUE brand and reference TSXDMZ28DR belongs to the range Modicon TSX Micro. Module with 28 inputs / outputs. Screw connection with 35 terminals. 16 inputs 24VDC and 12 relay outputs. This Telemecanique module TSXDMZ28DR is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€185.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00