Catalog

MTS-140-08/16-247/T - Servo Drive - AXOR

MTS-140-08/16-247/T

This AXOR servo drive, reference MTS-140-08/16-247/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-247/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€450.00

MTS-140-08/16-RX-S-0247/TO-RD - Servo Drive - AXOR

MTS-140-08/16-RX-S-0247/TO-RD

This AXOR servo drive, reference MTS-140-08/16-RX-S-0247/TO-RD is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 8A 250V - 95 Vac. 3 phases This servo drive MTS-140-08/16-RX-S-0247/TO-RD is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€485.00

MTS-140-20/40-248/T - Servo Drive - AXOR

MTS-140-20/40-248/T

This AXOR servo drive, reference MTS-140-20/40-248/T is a servo drive that belongs to the MASTERSPEED range of AXOR. AXOR servo drive : 20A 250V - 95 Vac. 3 phases This servo drive MTS-140-20/40-248/T is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€790.00

M-YSB3040KN001 - Servo Motor - NSK

M-YSB3040KN001

This servomotor M-YSB3040KN001 and brand NSK is a motor of the range YSB Series Megatorque Motor Maximum torque 40 Nm, input value: 1.6 Arms, Power in watt: 200 W This servomotor M-YSB3040KN001 NSK is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,480.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

FN-XY16SC41 - I/O Module - PROFACE

FN-XY16SC41

This reference I/O module FN-XY16SC41 and PROFACE brand is part of the SP5000 range. 16 discrete points, 16 point input, transistor output This reconditioned and tested PROFACE automaton is at your disposal to replace your defective equipment and has a guarantee.

€385.00