Catalog

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

On sale!

6AV6641-0CA01-0AX1 - Operator Panel - SIEMENS

6AV6641-0CA01-0AX1

OP SIEMENS reference 6AV6641-0CA01-0AX1 for Simatic HMI. SIMATIC Operator Panel OP 77B Backlit LCD display, 4.5 "graphic display, MPI- / PROFIBUS-DP interface up to 12 MB, printer / USB interface, slot for MMC, configurable with WinCC. This OP 6AV6641-0CA01-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€570.00

6SC6100-0GA00 - Power supply board - SIEMENS

6SC6100-0GA00

This SIEMENS power supply board and 6SC6100-0GA00 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GA00 SIEMENS SIMODRIVE 610/210 VSA FBG. FEEDING AND MONITORING This 6SC6100-0GA00 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board refurbished and tested on...

€850.00

6SC6100-0GB11 - Power supply board - SIEMENS

6SC6100-0GB11

This SIEMENS power supply board and 6SC6100-0GB11 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GB11 SIEMENS SIMODRIVE 610/210 VSA FBG ELECTRICAL POWER SUPPLY AND VOLTAGE LIMITATION This 6SC6100-0GB11 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board...

€520.00

6AV6641-0CA01-0AX0 - Operator Panel - SIEMENS

6AV6641-0CA01-0AX0

OP SIEMENS reference 6AV6641-0CA01-0AX0 for Simatic HMI. SIMATIC OPERATOR PANEL OP77B BACKLIGHT LCD SCREEN GRAPH SCREEN. 4.5 ", MPI / PROFIBUS-DP INTERFACE UP TO 12 MB, PRINTER / USB INTERFACE, SLOT P. MMC CARD. This OP 6AV6641-0CA01-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€630.00

CP10G-04 - HMI terminal - EXOR

CP10G-04

This EXOR reference CP10G-04 HMI screen is part of the UniOP series. CP10G-04: 24V; Monochrome LCD screen; memory: 16KB. This EXOR terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Device 100% tested.

€790.00