Catalog

Showing 1-21 of 21 item(s)

A06B-6093-H114 - Servo Amplifier - FANUC

A06B-6093-H114

This FANUC servo amplifier unit is reference A06B-6093-H114. Servo Amplifier SVU1-80 module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 27A (1PH) / 17A (3PH). Maximum output voltage: 240V ~. Rated output current: 15.0A FANUC servo amplifier unit reconditioned and tested on bench manufacturer...

€1,320.00

A06B-6093-H151 - Servo Amplifier - FANUC

A06B-6093-H151

This FANUC servo amplifier unit is reference A06B-6093-H151. Servo Amplifier SVU1-12 I / O module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 3.2A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on bench...

€1,480.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

MR-J2-100CT - Servodrive - MITSUBISHI

MR-J2-100CT

This MITSUBISHI servodrive, reference MR-J2-100CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF102 and HC-SF103 Servo Motor This MR-J2-100CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€780.00

A06B-6093-H113 - Servo Amplifier - FANUC

A06B-6093-H113

This FANUC servo amplifier unit is reference A06B-6093-H113. Servo Amplifier SVU1-40 module with fiber optic interface. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 15A (1PH) / 9.4A (3PH). Maximum output voltage: 240V ~. Rated output current: 12.5A FANUC servo amplifier unit reconditioned and tested on bench manufacturer...

€1,450.00

MR-J2-10CT - Servodrive - MITSUBISHI

MR-J2-10CT

This MITSUBISHI servodrive, reference MR-J2-10CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF053/13 and HC-MF053/13 Servo Motor This MR-J2-10CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€810.00

MR-J2-70CT - Servodrive - MITSUBISHI

MR-J2-70CT

This MITSUBISHI servodrive, reference MR-J2-70CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-MF73 Servo Motor This MR-J2-70CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,080.00

MR-J2-20CT - Servodrive - MITSUBISHI

MR-J2-20CT

This MITSUBISHI servodrive, reference MR-J2-20CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF023 and HC-MF23 Servo Motor This MR-J2-20CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-40CT - Servodrive - MITSUBISHI

MR-J2-40CT

This MITSUBISHI servodrive, reference MR-J2-40CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HA-FF33/43 and HC-MF43 Servo Motor This MR-J2-40CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€880.00

MR-J2-60CT - Servodrive - MITSUBISHI

MR-J2-60CT

This MITSUBISHI servodrive, reference MR-J2-60CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF52/53 and HA-FF63 Servo Motor This MR-J2-60CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€960.00

MR-J2-200CT - Servodrive - MITSUBISHI

MR-J2-200CT

This MITSUBISHI servodrive, reference MR-J2-200CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF152/202/153/203 and HC-RF103/153 Servo Motor This MR-J2-200CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,420.00

MR-J2-350CT - Servodrive - MITSUBISHI

MR-J2-350CT

This MITSUBISHI servodrive, reference MR-J2-350CT is a Servo AC drive with indexing function. it belongs to the range MELDAS. Mitsubishi AC 3PH 200 to 230 VAC 50/60 Hz Servodrive for HC-SF352/353 and HC-RF203 Servo Motor This MR-J2-350CT servodrive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,640.00

A06B-6093-H101 - Servo Amplifier - FANUC

A06B-6093-H101

This FANUC servo amplifier unit is reference A06B-6093-H101. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module Type B : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 2.3A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on bench...

€640.00

A06B-6093-H102 - Servo Amplifier - FANUC

A06B-6093-H102

This FANUC servo amplifier unit is reference A06B-6093-H102. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module Type B : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 10.1A (1PH) / 6.3A (3PH). Maximum output voltage: 240V ~. Rated output current: 5.9A FANUC servo amplifier module reconditioned and tested on bench...

€950.00

A06B-6093-H103 - Servo Amplifier - FANUC

A06B-6093-H103

This FANUC servo amplifier unit is reference A06B-6093-H103. Servo Amplifier SVU1-40 module with PWM. Type B. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 15A (1PH) / 9.4A (3PH). Maximum output voltage: 240V ~. Rated output current: 12.5A FANUC servo amplifier unit reconditioned and tested on bench manufacturer (Test 100%).

€1,780.00

A06B-6093-H104 - Servo Amplifier - FANUC

A06B-6093-H104

This FANUC servo amplifier unit is reference A06B-6093-H104. Servo Amplifier SVU1-80 module with PWM. Type B. BETA range. Servo amplifier module : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 27A (1PH) / 17A (3PH). Maximum output voltage: 240V ~. Rated output current: 15.0A FANUC servo amplifier unit reconditioned and tested on bench manufacturer (Test 100%).

€1,600.00

A06B-6093-H111 - Servo Amplifier - FANUC

A06B-6093-H111

This FANUC servo amplifier unit is reference A06B-6093-H111. Servo Amplifier SVU1-12 module with fiber optic interface. BETA range. Servo amplifier module (Fiber optic) : Input: 220-240V ~ (1PH) / 200-240V ~ (3PH) 5.1A (1PH) / 3.2A (3PH). Maximum output voltage: 240V ~. Rated output current: 3.2A FANUC servo amplifier module reconditioned and tested on...

€710.00

R88D-1SN08H-ECT - Servo Drive - OMRON

R88D-1SN08H-ECT

This OMRON servo drive is reference R88D-1SN08H-ECT. It matches the 1S Sysmac servo drive range. Servo drive : Input: 230V single phase, 50/60Hz, Output: 7.3A, 750W. Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€360.00

R88M-1M75030T-S2 - Servo motor - OMRON

R88M-1M75030T-S2

This OMRON R88M-1M75030T-S2 servo motor is a SYSMAC 1S series motor. Characteristics: 230V, 750W, 4.6A for R88D-1SN08H-ECT. servo drive. This R88M-1M75030T-S2 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

6AV2125-2AE13-0AX0 - Panel box - SIEMENS

6AV2125-2AE13-0AX0

SIEMENS panel box reference 6AV2125-2AE13-0AX0 SIMATIC HMI series. SIMATIC HMI connection box Standard SIMATIC HMI junction box standard for Mobile Panels, wall mounting, PROFINET and PROFIsafe, connection of safety relays, connection point detection integrated switch This SIEMENS HMI is at your disposal to replace your defective equipment and has a...

€1,490.00