Catalog

A06B-6050-H103 - Velocity Control Unit - FANUC

A06B-6050-H103

This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€600.00

MDH2A02TB-RB23 - Motion Controller - BALDOR

MDH2A02TB-RB23

This reference motion controller MDH2A02TB-RB23 and brand BALDOR is a controller for Brushless AC motor. MintDrive II range. Desc: 2.5A/24V/DB/Res/2CAN Input: AC230V 50/60Hz, Single Phase Output: 2.5A/ACO-230V This BALDOR motion controller is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€850.00

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

M-YSB3040KN001 - Servo Motor - NSK

M-YSB3040KN001

This servomotor M-YSB3040KN001 and brand NSK is a motor of the range YSB Series Megatorque Motor Maximum torque 40 Nm, input value: 1.6 Arms, Power in watt: 200 W This servomotor M-YSB3040KN001 NSK is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,480.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00