Catalog

A06B-6050-H103 - Velocity Control Unit - FANUC

A06B-6050-H103

This FANUC velocity control unit is reference A06B-6050-H103. AC drive for FANUC Model 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€600.00

FX0S-20MR-ES/UL - PLC Module - MITSUBISHI

FX0S-20MR-ES/UL

MITSUBISHI PLC reference FX0S-20MR-ES/UL. Melsec FX0S Series. 20 inputs / outputs. Power supply 100-240 V AC. 50/60 Hz. 33 VA of power consumption. This FX0S-20MR-ES/UL controller is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€245.00

A06B-6088-H326 - Spindle Amplifier Module - FANUC

A06B-6088-H326

This FANUC spindle drive, reference A06B-6088-H326#H500 is a Spindle Amplifier Module. Belongs to Fanuc Alpha SPM-26 range. Alpha Fanuc series type 1 : Input : 283-325V, 29.8kW, output voltage : 230V ~ rated output current : 111A This A06B-6088-H326#H500 is at your disposal to replace your defective hardware and has a warranty adapted to your needs.

€4,180.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00