Catalog

73-552-0005 - Power Supply - ASTEC

73-552-0005

This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330

This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.

€520.00

1769-L33ER - Processor - ALLEN BRADLEY

1769-L33ER

This processor ALLEN BRADLEY 1769-L33ER is part of the range CompactLogix 5370 Controllers. 2 MB, 4.5W Current draw @ 5V DC, controller power: 500 mA Current draw @ 24V DC, controller power: 225 mA This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,620.00

1769-L16ER-BB1B - Processor - ALLEN BRADLEY

1769-L16ER-BB1B

This ALLEN BRADLEY 1769-L16ER-BB1B processor is part of the CompactLogix 5370 Controllers family. 16 inputs / 24V DC sink 50V DC (continuous), Basic Insulation Type.Tested at 500V AC for 60s, system to field. No isolation between individual channels This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€1,020.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00