Catalog

A16B-1212-0100-01 - Power Unit - FANUC

A16B-1212-0100-01

This FANUC power supply A16B-1212-0100-01 is at your disposal. Fanuc Series 0-C, used for 0MC, 0TC, 0TTC, 0P4C and OPC and 0-GC. This Fanuc power supply A16B-1212-0100-01 comes with a warranty. Refurbished and fully loaded power supply (time test) on FANUC bench.

€540.00

R88D-1SN08H-ECT - Servo Drive - OMRON

R88D-1SN08H-ECT

This OMRON servo drive is reference R88D-1SN08H-ECT. It matches the 1S Sysmac servo drive range. Servo drive : Input: 230V single phase, 50/60Hz, Output: 7.3A, 750W. Servo drive OMRON reconditioned and tested on bench manufacturer (Test 100%)

€360.00

R88M-1M75030T-S2 - Servo motor - OMRON

R88M-1M75030T-S2

This OMRON R88M-1M75030T-S2 servo motor is a SYSMAC 1S series motor. Characteristics: 230V, 750W, 4.6A for R88D-1SN08H-ECT. servo drive. This R88M-1M75030T-S2 servomotor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€320.00

CJ1W-II101 - Interface module - OMRON

CJ1W-II101

This OMRON brand module and reference CJ1W-II101 belongs to the CJ1W-IC/II range. Features: An I/O interface unit is required on each expansion rack. Connection cable: extension connection cable. Climb up to the right of the power supply. This OMRON module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€99.00

CJ1W-IC101 - Control unit - OMRON

CJ1W-IC101

This OMRON brand module and reference CJ1W-IC101 belongs to the CJ1W-IC/II range. Features: Mount one I/O Control Unit on the CPU Rack when connecting one or more Expansion Racks. Connecting Cable: Expansion Connecting Cable Connected Unit: CJ1W-II101 I/O Interface Unit Mount to the right of the CPU Unit. This OMRON module is at your disposal to replace...

€99.00