Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Catalog

73-552-0005 - Power Supply - ASTEC

73-552-0005
This 73-552-0005 and ASTEC brand power supply module belongs to the MP range. Astec and Artesyn AC DC and DC DC Products. MP Series - Up to 1200 Watts. 73-552-0005 : Input : 380V. Output : 360W, 5V This Astec 73-551-0005 module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€460.00

73-554-0330 - Power Supply - ASTEC

73-554-0330
This ASTEC / ARTESYN power supply module 73-554-0330 belongs to the MP4 Module range. Standard 144W MP power supply with 12 ohm precharge resistor. (4NN, V1 et V2 = 15V) (4LL, V1 et V2 = 12V) This ASTEC 73-554-0330 power supply module, tested under full load, is at your disposal to replace your defective module.
€520.00

BT20/002280 - Operator Terminal - SUTRON/BOSCH

BT20/002280
This operator terminal SUTRON reference BT20/002280 belongs to the BT20 range. TesiMod BT20 reconditioned and thoroughly tested. This operator terminal BOSCH/SUTRON is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€620.00

6AV6641-0BA11-0AX0 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX0
OP SIEMENS reference 6AV6641-0BA11-0AX0 for Simatic HMI. SIMATIC OPERATOR PANEL OP77A BACKLIT LC DISPLAY, 4.5 "DISPLAY W. GRAPHICS CAPABIL MPI- / PROFIBUS-DP INTERFACE UP TO 1,5MB, FOR WINCC CONFIGURATION FLEXIBLE 2004 COMPACT HSP UPWARDS. This OP 6AV6641-0BA11-0AX0 is at your disposal to replace your defective equipment and has a guarantee adapted to...
€380.00

6AV6641-0BA11-0AX1 - Operator Panel - SIEMENS

6AV6641-0BA11-0AX1
OP SIEMENS reference 6AV6641-0BA11-0AX1 for Simatic HMI. SIMATIC OP 77A operator panel backlit LC display, 4.5 '' graphic display, MPI- / PROFIBUS-DP interface up to 1.5MB, configurable from WinCC flexible 2004 Compact HSP This OP 6AV6641-0BA11-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€660.00

RS1A03AA - Servo Amplifier - SANYO DENKI

RS1A03AA
This reference RS1A03AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A03AA : INPUT: 3x230 V, 5.8A ; OUTPUT: 5.2A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€630.00

RS1A01AA - Servo Amplifier - SANYO DENKI

RS1A01AA
This reference RS1A01AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A01AA: INPUT: 3x230 V, 2.5A ; OUTPUT: 2.5A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€360.00

RS1A05AA - Servo Amplifier - SANYO DENKI

RS1A05AA
This reference RS1A05AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1A05AA: INPUT: 3x230 V, 13.3A ; OUTPUT: 12A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€690.00

RS1L05AA - Servo Amplifier - SANYO DENKI

RS1L05AA
This reference RS1L05AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L05AA: INPUT: 3x230 V, 13.3A ; OUTPUT: 12A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€760.00

RS1L01AA - Servo Amplifier - SANYO DENKI

RS1L01AA
This reference RS1L01AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L01AA: INPUT: 3x230 V, 2.5A ; OUTPUT: 2.5A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€580.00

RS1L03AA - Servo Amplifier - SANYO DENKI

RS1L03AA
This reference RS1L03AA servo motor drive and SANYO DENKI brand is a drive from the SANMOTION R series. RS1L03AA: INPUT: 3x230 V, 5.8A ; OUTPUT: 5.2A. This SANYO DENKI servo drive is at your disposal to replace your defective equipment and has an appropriate guarantee. Drive tested on an engine test bench.
€680.00