Catalog

Showing 1-19 of 19 item(s)

3HAB9271-1/01B - Dummy box unit - ABB

3HAB9271-1/01B

ABB reference dummy module 3HAB9271-1/01B for Robot IRB 2400 series. Dummy module for S4C rack, ABB description: DUMMY DRIVE MODULE SYSTEM This ABB dummy module can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€105.00

3HAB8101-2/04B - DSQC345B - Rectifier - ABB

3HAB8101-2/04B

ABB reference rectifier 3HAB8101-2/04B (referenced also: DSQC345B) for robot of the IRB2400 range. Rectifier for S4C rack, ABB description: RECTIFIER DC1 This ABB rectifier can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€940.00

3HAB8101-6/07B - DSQC346B - Drive Controller- ABB

3HAB8101-6/07B

ABB reference drive 3HAB8101-6/07B (referenced also: DSQC346B) for robot of the IRB2400 range. Drive for S4C rack, ABB description : DRIVE UNIT ABB This ABB drive can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€990.00

3HAB8101-11/06B - DSQC346E - Servo Drive -ABB

3HAB8101-11/06B

ABB reference 3HAB8101-11/06B (referenced also as DSQC346E) for Robot IRB2400 series. Drive for S4C rack, ABB description: DRIVE UNIT This ABB drive can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,360.00

3HAB8859-1/01B - Connecting strip - ABB

3HAB8859-1/01B

ABB bus busbar reference 3HAB8859-1/01B for IRB 2400 range robot. Terminal strip for S4C rack. ABB description: Power supply bar This ABB is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€25.00

BT20/002280 - Operator Terminal - SUTRON/BOSCH

BT20/002280

This operator terminal SUTRON reference BT20/002280 belongs to the BT20 range. TesiMod BT20 reconditioned and thoroughly tested. This operator terminal BOSCH/SUTRON is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00

DST1201 - Variable speed drive - CONTROL TECHNIQUES

DST1201

This servo motor reference DST1201 and Control Techniques brand is a drive from the DIGITAX ST range. DST1201: Single phase 200/240V, 1.1A. Three-phase 200/240V, 1.7A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,760.00

DST1202 - Variable speed drive - CONTROL TECHNIQUES

DST1202

This servo motor reference DST1202 and Control Techniques brand is a drive from the DIGITAX ST range. DST1202: Single phase 200/240V, 2.4A. Three-phase 200/240V, 3.8A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€3,600.00

DST1203 - Variable speed drive - CONTROL TECHNIQUES

DST1203

This servo motor reference DST1203 and Control Techniques brand is a drive from the DIGITAX ST range. DST1203: Single phase 200/240V, 2.9A. Three-phase 200/240V, 5.4A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,990.00

DST1204 - Variable speed drive - CONTROL TECHNIQUES

DST1204

This servo motor reference DST1204 and Control Techniques brand is a drive from the DIGITAX ST range. DST1204: Single phase 200/240V, 4.7A. Three-phase 200/240V, 7.6A This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€4,140.00

DST1401 - Variable speed drive - CONTROL TECHNIQUES

DST1401

This servo motor reference DST1401 and Control Techniques brand is a drive from the DIGITAX ST range. DST1401: Triphasé 380/480V, 1.5A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,190.00

DST1402 - Variable speed drive - CONTROL TECHNIQUES

DST1402

This servo motor reference DST1402 and Control Techniques brand is a drive from the DIGITAX ST range. DST1402: Triphasé 380/480V, 2.7A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,860.00

DST1403 - Variable speed drive - CONTROL TECHNIQUES

DST1403

This servo motor reference DST1403 and Control Techniques brand is a drive from the DIGITAX ST range. DST1403: Triphasé 380/480V, 4A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,510.00

DST1404 - Variable speed drive - CONTROL TECHNIQUES

DST1404

This servo motor reference DST1404 and Control Techniques brand is a drive from the DIGITAX ST range. DST1404: Triphasé 380/480V, 5.9A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€1,950.00

DST1405 - Variable speed drive - CONTROL TECHNIQUES

DST1405

This servo motor reference DST1405 and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,890.00

DST1405P - Variable speed drive - CONTROL TECHNIQUES

DST1405P

This servo motor reference DST1405P and Control Techniques brand is a drive from the DIGITAX ST range. DST1405: Triphasé 380/480V, 8A. This Control techniques drive is at your disposal to replace your defective equipment and have an appropriate guarantee. Drive tested on an engine test bench.

€2,940.00

New product

3HAB8101-8/08D - DSQC346G - Servo Drive -ABB

3HAB8101-8/08D - DSQC346G

ABB reference 3HAB8101-8/08D - DSQC346G for Robot IRB2400 series. Drive for S4C rack, ABB description: DRIVE UNIT This ABB drive can also be distributed under the Atlas Copco brand. It is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€980.00