Catalog

BT20/002280 - Operator Terminal - SUTRON/BOSCH

BT20/002280

This operator terminal SUTRON reference BT20/002280 belongs to the BT20 range. TesiMod BT20 reconditioned and thoroughly tested. This operator terminal BOSCH/SUTRON is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€620.00

1769-L33ER - Processor - ALLEN BRADLEY

1769-L33ER

This processor ALLEN BRADLEY 1769-L33ER is part of the range CompactLogix 5370 Controllers. 2 MB, 4.5W Current draw @ 5V DC, controller power: 500 mA Current draw @ 24V DC, controller power: 225 mA This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,620.00

1769-L16ER-BB1B - Processor - ALLEN BRADLEY

1769-L16ER-BB1B

This ALLEN BRADLEY 1769-L16ER-BB1B processor is part of the CompactLogix 5370 Controllers family. 16 inputs / 24V DC sink 50V DC (continuous), Basic Insulation Type.Tested at 500V AC for 60s, system to field. No isolation between individual channels This processor is at your disposal to replace your defective equipment and has a guarantee adapted to your...

€1,020.00

V23162-B0719-B110 - Kammrelais - SIEMENS

V23162-B0719-B110

This SIEMENS brand and reference relay V23162-B0719-B110 is part of the V23154-NO range. 1 Siemens V23162-B0719-B110 sealed comb relay, 12 VDC spool coil 325 ohm 4-way contactor 150V 2Amp size H30 L29 B18 mm. This relay SIEMENS is at your disposal in supply to replace your defective equipment and has a guarantee adapted to your needs.

€25.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00