Catalog

On sale!

3HNE-00313-1 - Teach Pendant - ABB

3HNE-00313-1

ABB Teach Pendant 3HNE00313-1 equipped with a backlit LCD screen.Used for S4C / S4C + (M97 to M2000) This system will allow you to quickly replace your faulty equipment. The teach pendant 3HNE00313-1 comes with its dedicated cable, connector and with a warranty according ti your needs.

€440.00

3HAB7230-1 - DSQC 327 - Module - ABB

3HAB7230-1

This module of ABB brand and reference 3HAB7230-1 belongs to the robot range IRB 6400. Module with 16 Inputs and 16 Outputs. This ABB module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€775.00

TC3000 - Thyristor power unit - EUROTHERM

TC3000

EUROTHERM reference 100A / 400V thyristor power unit TC3000 for the control of electric power on three-phase industrial loads. This EUROTHERM dimmer is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Dimmer refurbished and tested under full load (100% test).

€1,720.00

BSM63N-175AA - Servo Motor brushless - BALDOR

BSM63N-175AA

This reference motor BSM63N-175AA and brand BALDOR is a Brushless AC motor. N series range. TORQ CONT STALL: 0.77 NM, CUR CONT STALL / A RMS: 1,01, POWER: 0,24kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: : 10000 This BALDOR engine is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€520.00

BSM50N-275AA - Servo Motor brushless - BALDOR

BSM50N-275AA

This reference motor BSM50N-275AA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 0.91 NM, CUR CONT STALL / A RMS: 1.42, POWER: 0.18kW, RATED SPEED / RPM: 2000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR motor is at your disposal to replace your equipment and has a guarantee adapted to your needs

€580.00

BSM63N-275BA - Servo Motor brushless - BALDOR

BSM63N-275BA

This reference motor BSM63N-275BA and brand BALDOR is a Brushless AC motor. N series range TORQ CONT STALL: 1,47 NM, CUR CONT STALL / A RMS: 1,94, POWER: 0,53kW, RATED SPEED / RPM: 4000, RATED BUS VOLTS: MECH SPEED: 10000 This BALDOR engine is at your disposal to replace your equipment and has a guarantee adapted to your needs

€620.00

JZNC-NIF02-1 - I/O Interface board - YASKAWA

JZNC-NIF02-1

This JZNC-NIF02-1 and YASKAWA interface I/O board is an NX100 robot control unit interface board. Robot I/F unit, associated with a CPS-420F power supply and CPU JZNC-NRK01. This JZNC-NIF02-1 YASKAWA interface board is available to replace your defective equipment and has a guarantee adapted to your needs.

€1,875.00

CPS-420F - Control power supply - YASKAWA

CPS-420F

This YASKAWA control ower Supply and CPS-420F reference is used for the MOTOMAN NX100 controller. NX100 compatible with EPX2800, EPX1250 and EPX2050. This CPS-420F power supply is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,110.00