Catalog

Showing 37-72 of 432 item(s)

A06B-6080-H304 - Servo Amplifier Module - FANUC

A06B-6080-H304

This FANUC servo amplifier with 3 axes and reference A06B-6080-H304 is an AC drive. SVM3-20/20/20. Input: 283-325V, Output: 3.7 kW, Output 230v ~ 5.9A / 5.9 / 5.9, Type B This servo amplifier A06B-6080-H304 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo amplifier reconditioned and tested under full...

€1,960.00

A06B-6082-H206 - Spindle Amplifier Module - FANUC

A06B-6082-H206

This FANUC spindle drive, part number A06B-6082-H206#H512 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPMC-5.5 range. Spindle drive, Alpha C Fanuc series. 6.8kw, 230V, 27A. This drive A06B-6082-H206#H512 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,650.00

A06B-6077-H106 - Power Supply - FANUC

A06B-6077-H106

This power supply A06B-6077-H106 Alpha Fanuc is at your disposal. Fanuc PSM-5.5 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H106 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.

€1,185.00

A06B-6079-H101 - Servo Amplifier Module - FANUC

A06B-6079-H101

This FANUC Axis Drive A06B-6079-H101, FANUC Servo Amplifier Module Alpha SVM1-12 is designed for FANUC Alpha 22 motors. Fanuc Alpha SVM1-12 Servo amplifier. 1 axe. Type A/B interface Alpha Module. Input : >283-325V, 0,75kW,. Output: 3A This A06B-6079-H101 axis drive is at your disposal to replace your defective equipment and has a guarantee of...

€700.00

A06B-6079-H201 - Servo Amplifier Module - FANUC

A06B-6079-H201

This FANUC 2-axis and reference A06B-6079-H201 is available to replace your equipment. SVM2-12/12. Rated input : 283-325v / Power : 1.5 kW. - Rated Output 230v~ 3.0A/3.0A This A06B-6079-H201 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,160.00

A06B-6079-H202 - Servo Amplifier Module - FANUC

A06B-6079-H202

This FANUC 2-axis and reference A06B-6079-H202 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2 kW. - Rated Output 230v~ 3.0A/5.9A This A06B-6079-H202 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,030.00

A06B-6079-H203 - Servo Amplifier Module - FANUC

A06B-6079-H203

This FANUC 2-axis and reference A06B-6079-H203 is available to replace your equipment. SVM2-12/20. Rated input : 283-325v / Power : 2,5 kW. - Rated Output 230v~ 5.9A/5.9A This A06B-6079-H203 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test)...

€1,180.00

A06B-6079-H204 - Servo Amplifier Module - FANUC

A06B-6079-H204

This FANUC 2-axis and reference A06B-6079-H204 is available to replace your equipment. SVM2-12/40. Rated input : 283-325v / Power : 3,4 kW. - Rated Output 230v~ 3.0A/12.5A This A06B-6079-H204 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,280.00

A06B-6079-H205 - Servo Amplifier Module - FANUC

A06B-6079-H205

This FANUC 2-axis and reference A06B-6079-H205 is available to replace your equipment. SVM2-20/40. Rated input : 283-325v / Power : 3,9 kW. - Rated Output 230v~ 5.9A/12.5A This A06B-6079-H205 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration...

€1,300.00

A16B-2203-0764 - Process I/O HE - FANUC

A16B-2203-0764

This FANUC I/O process board is part number A16B-2203-0764. It is installed on FANUC RJ3 Robot. This FANUC card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Card reconditioned and tested on bench manufacturer (Test 100%).

€6,350.00

A16B-1211-0970 - I/O Board - FANUC

A16B-1211-0970

This FANUC I/O board is part number A16B-1211-0970. It is part of the FANUC Series 0-C. Features: E3 I/O 104/72 DI/DO for 0-MC, 0-TC, 0-MD, 0-TD. This FANUC board is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Board reconditioned and tested on bench manufacturer (Test 100%).

€620.00

A16B-3200-0042 - CPU Board - FANUC

A16B-3200-0042

This FANUC CPU board reference A16B-3200-0042 is designed to equip FANUC robots. This CPU LR-Mate card is used to integrate the CPU module, the axis card and the From/Sram module. This card A16B-3200-0042 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€670.00

A06B-6089-H105 - Servo Amplifier Module - FANUC

A06B-6089-H105

This FANUC amplifier module with 1 axis and reference A06B-6089-H105 is a drive type AC.SVU 1-80. Input: 200-230V / Power: 17A. - Nominal output 230V ~ 17A / 18.7A This amplifier module A06B-6089-H105 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load...

€695.00

On sale!

A06B-6089-H208 - Servo Amplifier Module - FANUC

A06B-6089-H208

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H208 is a drive type AC. SVU2-80/80. Input: 200-230V/Power: 13A. - Nominal output 230V ~ 10A/10A This servo amplifier A06B-6089-H208 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,210.00

A06B-6088-H222 - Spindle Amplifier Module - FANUC

A06B-6088-H222

This FANUC reference spindle drive A06B-6088-H222#H500 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-22 range Alpha Fanuc series type 1 : Input : 283-325V, 25.2kW, output voltage : 230V ~ rated output current : 95A This spindle amplifier module A06B-6088-H222#H500 is at your disposal to replace your defective equipment and has a guarantee...

€1,780.00

A06B-6050-H402 - Velocity Control Unit - FANUC

A06B-6050-H402

This FANUC velocity control unit is reference A06B-6050-H402. AC drive for FANUC Model 0, 5 and 10 type axis motor. This FANUC velocity control unit is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. FANUC system reconditioned and tested on bench manufacturer (Test 100%).

€2,310.00

A06B-6102-H211 - Spindle Amplifier Module - FANUC

A06B-6102-H211

This FANUC reference spindle drive A06B-6102-H211#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-11-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 48A This spindle amplifier module A06B-6102-H211#H520 is at your disposal to replace your defective equipment and has a...

€1,460.00

A20B-2100-0770 - Operator Panel PC Board - FANUC

A20B-2100-0770

This FANUC reference board A20B-2100-0770 is used for FANUC R-j3iB robots. LED: communication status with the main boardON NormalOFF Communication errorPON: Illuminates normally when the internal power supply of the panel board produces + 5V. This FANUC control board is sold with a guarantee of operation.

€1,249.00

A05B-2301-C305 - Teach Pendant - FANUC

A05B-2301-C305

This Fanuc branded reference box A05B-2301-C305 is at your disposal. This Teach Pendant, for Robot FANUC working with controller R-J3, makes possible the programming and all the control operations and others of the robots FANUC. This FANUC teach is reconditioned and tested on FANUC robot.

€895.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200

This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.

€1,560.00

A06B-6079-H104 - Servo Amplifier Module - FANUC

A06B-6079-H104

This axis drive A06B-6079-H104 and FANUC brand is an amplifier module. This drive belongs to the range Alpha SVM1-40L. Fanuc Alpha SVM-40L Servo Amplifier. Single Axis Type A Interface Alpha Module. Input: 283-325 volts / 3.75 kW. Output: 12,5A This A06B-6079-H104 Fanuc amplifier module is at your disposal to replace your defective equipment and has a...

€870.00

A06B-6089-H101 - Servo Amplifier Module - FANUC

A06B-6089-H101

This FANUC amplifier module with 1 axis and reference A06B-6089-H101 is a drive type AC.SVU 1-12. Input: 200-230V / Power: 2.2A. - Nominal output 230V ~ 3.0A. This amplifier module A06B-6089-H101 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load (test...

€570.00

A06B-6089-H201 - Servo Amplifier Module - FANUC

A06B-6089-H201

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H201 is a drive type AC. SVU2-12/12. Input: 200-230V/Power: .4.5A. - Nominal output 230V ~ 3.0A/3.0A This servo amplifier A06B-6089-H201 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,040.00

A06B-6089-H205 - Servo Amplifier Module - FANUC

A06B-6089-H205

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H205 is a drive type AC. SVU2-20/40. Input: 200-230V/Power: 14.0A. - Nominal output 230V ~ 5.9A/8.8A This servo amplifier A06B-6089-H205 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,810.00

A06B-6089-H102 - Servo Amplifier Module - FANUC

A06B-6089-H102

This FANUC amplifier module with 1 axis and reference A06B-6089-H102 is a drive type AC.SVU 1-20. Input: 200-230V / Power: 4.6A. - Nominal output 230V ~ 5.9A This amplifier module A06B-6089-H102 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load (test...

€1,320.00

A06B-6089-H104 - Servo Amplifier Module - FANUC

A06B-6089-H104

This FANUC amplifier module with 1 axis and reference A06B-6089-H104 is a drive type AC.SVU 1-40. Input: 200-230V / Power: 13.4A. - Nominal output 230V ~ 12.5A This amplifier module A06B-6089-H104 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load...

€670.00

A06B-6089-H106 - Servo Amplifier Module - FANUC

A06B-6089-H106

This FANUC amplifier module with 1 axis and reference A06B-6089-H106 is a drive type AC.SVU 1-130. Input: 200-230V / Power: 27.0A. - Nominal output 230V ~ 52.2A This amplifier module A06B-6089-H106 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Amplifier module reconditioned and tested under full load...

€3,820.00

A06B-0147-B177 - Servo Motor - FANUC

A06B-0147-B177

This servo motor A06B-0147-B177 and brand FANUC is a motor of the range Alpha, Model: a22/2000 Output: 3,8kW, 15A, Frequency: 133Hz, 2000 RPM. This A06B-0147-B177 FANUC motor is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

€1,940.00

A06B-6089-H202 - Servo Amplifier Module - FANUC

A06B-6089-H202

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H202 is a drive type AC. SVU2-12/20. Input: 200-230V/Power: 8.0A. - Nominal output 230V ~ 3.0A/5.9A This servo amplifier A06B-6089-H202 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,790.00

A06B-6087-H115 - Power Supply Module - FANUC

A06B-6087-H115

This power supply A06B-6087-H115 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply. Input: 200-230V, 63A, 50 / 60Hz, 3ph, output: 17.5kW. This Alpha Fanuc A06B-6087-H115 power supply is sold with a warranty. Reconditioned power supply and tested under full load (test duration) on FANUC bench.

€1,740.00

A06B-6080-H301 - Servo Amplifier Module - FANUC

A06B-6080-H301

This FANUC servo amplifier with 3 axes and reference A06B-6080-H301 is an AC drive. SVM3-12/12/12. Input: 283-325V, Output: 1.85 kW, Output 230v ~ 3.0A / 3.0A / 3.0A, Type B This servo amplifier A06B-6080-H301 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo amplifier reconditioned and tested under...

€2,100.00

A06B-6102-H215 - Spindle Amplifier Module - FANUC

A06B-6102-H215

This FANUC reference spindle drive A06B-6102-H215#H520 is a Spindle Amplifier Module. Belongs to the Fanuc Alpha SPM-15-1 range Alpha Fanuc series type 1 : Input : 283-325V, 17.5kW, output voltage : 230V ~ rated output current : 63A This spindle amplifier module A06B-6102-H215#H520 is at your disposal to replace your defective equipment and has a...

€1,640.00

A06B-6080-H302 - Servo Amplifier Module - FANUC

A06B-6080-H302

This FANUC servo amplifier with 3 axes and reference A06B-6080-H302 is an AC drive. SVM3-12/12/20. Input: 283-325V, Output: 1.85 kW, Output 230v ~ 3.0A / 3.0A / 5.9A, Type B This servo amplifier A06B-6080-H302 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Servo amplifier reconditioned and tested under...

€2,200.00

A06B-6117-H201 - Servo Amplifier Module - FANUC

A06B-6117-H201

This A06B-6117-H201 servo amplifier module and FANUC brand is available in stock. This 2-axis drive belongs to the Alpha I servo αiSVM2 range. SVM2-4/4i. HRV3 - Input: 283-339V, Power 0,24kW Output: 240V ~ 2x1,5A. (L&M axis) This servo amplifier module A06B-6117-H201 Fanuc is at your disposal to replace your defective equipment and has a guarantee...

€1,630.00

A06B-6117-H205 - Servo Amplifier Module - FANUC

A06B-6117-H205

This A06B-6117-H205 servo amplifier module and FANUC brand is available in stock. This 2-axis drive belongs to the Alpha I servo αiSVM2 range. SVM2-20/20i. HRV3 - Input: 283-339V, Power 5kW Output: 240V ~ 2x6,5A. (L&M axis) This servo amplifier module A06B-6117-H205 Fanuc is at your disposal to replace your defective equipment and has a guarantee...

€1,300.00

A06B-6089-H203 - Servo Amplifier Module - FANUC

A06B-6089-H203

This FANUC servo amplifier module with 2 axes and reference A06B-6089-H203 is a drive type AC. SVU2-20/20. Input: 200-230V/Power: 9.5A. - Nominal output 230V ~ 5.9A/5.9A This servo amplifier A06B-6089-H203 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs Drive reconditioned and tested under full load (test...

€1,200.00