On sale

1771-OAD - Analog output module - ALLEN BRADLEY
  • On sale!
  • -€10.00

1771-OAD - Analog output module - ALLEN BRADLEY

1771-OAD
This 1771-OAD and ALLEN BRADLEY reference output module is part of the PLC-5 series 1771 series. 120V VAC - 50 / 60Hz - 10 ... 138V 16 OUTPUTS This output module ALLEN BRADLEY is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€70.00 €80.00
Time left
3HNE-00313-1 - Teach Pendant - ABB
  • On sale!
  • -€265.00

3HNE-00313-1 - Teach Pendant - ABB

3HNE-00313-1
ABB Teach Pendant 3HNE00313-1 equipped with a backlit LCD screen.Used for S4C / S4C + (M97 to M2000) This system will allow you to quickly replace your faulty equipment. The teach pendant 3HNE00313-1 comes with its dedicated cable, connector and with a warranty according ti your needs.
€545.00 €810.00
Time left
499TWD01100 - Interface Module - TELEMECANIQUE
  • On sale!
  • -15%

499TWD01100 - Interface Module - TELEMECANIQUE

499TWD01100
This interface module 499TWD01100 and brand TELEMECANIQUE is a TwidoPort module for all databases> 3.0. This module belongs to the TWIDO range. 10/100 Mbit / s. Auto MDIX function. Connector type RJ45 wired TWD XCA RJP03P. This 499TWD01100 Telemecanique interface module is at your disposal to replace your defective equipment and has a warranty adapted...
€153.00 €180.00
Time left
6AV3617-1JC20-0AX1 - Operator Panel - SIEMENS
  • On sale!
  • -€100.00

6AV3617-1JC20-0AX1 - Operator Panel - SIEMENS

6AV3617-1JC20-0AX1
OP SIEMENS reference 6AV3617-1JC20-0AX1 for Simatic S7. OPERATOR PANEL OP17 / DP LC DISPLAY, BACKLIT 4X20 / 8X40 LED LINESXCHARACTERS SIMATIC S7, M7 PROFIBUS-DP 1.5 MBAUD UL / CSA-LISTED This OP 6AV3617-1JC20-0AX1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€580.00 €680.00
Time left
6FC5103-0AB02-1AA1 - Operator Panel - SIEMENS
  • On sale!
  • -€150.00

6FC5103-0AB02-1AA1 - Operator Panel - SIEMENS

6FC5103-0AB02-1AA1
Siemens HMI device reference 6FC5103-0AB02-1AA1 for sale in exchange service. Slimline oper. Panel with 9.5 "monochrome LC display, 24 V DC power supply, standard layout. System reconditioned and tested under full load (duration test) on Siemens 840C bench. This console is sold with a guarantee of operation.
€950.00 €1,100.00
Time left
6FC5103-0AB03-0AA3 - Operator Panel - SIEMENS
  • On sale!
  • -€200.00

6FC5103-0AB03-0AA3 - Operator Panel - SIEMENS

6FC5103-0AB03-0AA3
Siemens HMI device reference 6FC5103-0AB03-0AA3 for sale in exchange or standard. SINUMERIK 840C / 840CE 19 "SLIMLINE OPER. PANEL, COLOR 10.4" DISPLAY WITH INTEGRATED CNC FULL KEYBOARD AND OPERATOR PANEL INTERFACE 115-230 V AC System reconditioned and tested under full load (duration test) on Siemens 840C bench. This console is sold with a guarantee of...
€1,570.00 €1,770.00
Time left
6FC5210-0DF22-0AA0 - PCU - SIEMENS
  • On sale!
  • -€250.00

6FC5210-0DF22-0AA0 - PCU - SIEMENS

6FC5210-0DF22-0AA0
This CPU 6FC5210-0DF22-0AA0 and SIEMENS brand is a PCU of the range SINUMERIK 810D. SINUMERIK PCU 50 1.2 GHZ; 256 MB RAM; 24 V DC; WINDOWS NT WORKSTATION V4 FOR EMBEDDED SYSTEMS (WINNT4.0 WS EMBSYS) This Siemens 6FC5210-0DF22-0AA0 PCU is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€2,380.00 €2,630.00
Time left
6SN1118-0AA11-0AA1 - Control Board - SIEMENS
  • On sale!
  • -15%

6SN1118-0AA11-0AA1 - Control Board - SIEMENS

6SN1118-0AA11-0AA1
SIEMENS control board 1 reference axis 6SN1118-0AA11-0AA1 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 1 AXIS, FOR FEED DRIVES WITH 1FT5, ENHANCED INTERFACE This module SIEMENS 6SN1118-0AA11-0AA1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€323.00 €380.00
Time left
6SN1123-1AA00-0DA0 |Drive | SIEMENS
  • On sale!
  • -15%

6SN1123-1AA00-0DA0 - Drive - SIEMENS

6SN1123-1AA00-0DA0
This SIEMENS SIMODRIVE 6SN1123-1AA00-0DA0 is designed to control the range of brushless motors 1FT5 1FT6 and others ... This SIEMENS 1 axis 80A drive has internal ventilation. This controller is at your disposal in standard supply or exchange to replace your defective equipment and has a guarantee adapted to your needs.
€425.00 €500.00
Time left
6SN1145-1AA01-0AA1 | Power Supply | SIEMENS
  • On sale!
  • -10%

6SN1145-1AA01-0AA1 - Power Supply - SIEMENS

6SN1145-1AA01-0AA1
This SIEMENS (10/25 kw) reference power supply 6SN1145-1AA01-0AA1 is at your disposal to replace your defective equipment. It is for sale in standard exchange or in supply. This 6SN1145-1AA01-0AA1 power supply module has a functional guarantee to suit your needs.
€1,125.00 €1,250.00
Time left
6SN1145-1BA00-0BA0 | Power Supply | SIEMENS
  • On sale!
  • -10%

6SN1145-1BA00-0BA0 - Power Supply - SIEMENS

6SN1145-1BA00-0BA0
This reference SIEMENS (16/21 kw) power supply 6SN1145-1BA00-0BA0 is for sale in exchange or standard.Reconditioned and fully loaded power supply (time test) on Siemens 611D.This 6SN1145-1BA00-0BA0 power supply is sold with an operating guarantee adapted to your needs.
€990.00 €1,100.00
Time left
A06B-6058-H005 - Servo Amplifier - FANUC
  • On sale!
  • -15%

A06B-6058-H005 - Servo Amplifier - FANUC

A06B-6058-H005
This FANUC Servo Amplifier controller (series 6058) A06B-6058-H005 is designed to control FANUC motors 10M and 20M. This 1 axis controller is complete; it includes the power section and the reference control board A20B-1003-0090. This A06B-6058-H005 drive is available to replace your defective part and comes with a warranty according to your...
€561.00 €660.00
Time left
A06B-6077-H111 - Power Supply - FANUC
  • On sale!
  • -12%

A06B-6077-H111 - Power Supply - FANUC

A06B-6077-H111
This power supply A06B-6077-H111 Alpha Fanuc is at your disposal. Fanuc PSM-11 range, category: Alpha Power Supply.This Alpha Fanuc A06B-6077-H111 power supply comes with a warranty.Refurbished and fully loaded power supply (time test) on FANUC bench.
€695.20 €790.00
Time left
A06B-6079-H106 - Servo Amplifier Module - FANUC
  • On sale!
  • -€100.00

A06B-6079-H106 - Servo Amplifier Module - FANUC

A06B-6079-H106
This FANUC Axis Drive A06B-6079-H106, FANUC Servo Amplifier Module Alpha SVM1-130 is designed for FANUC Alpha 22 motors. Fanuc Alpha SVM1-130 Servo Amplifier. Single Axis Type A/B Interface Alpha Module. Input 283– 325 Volt  / 9,1 kW. Output 52,2A This A06B-6079-H106 axis drive is at your disposal to replace your defective equipment and has a guarantee of...
€830.00 €930.00
Time left
A06B-6079-H206 - Servo Amplifier Module - FANUC
  • On sale!
  • -10%

A06B-6079-H206 - Servo Amplifier Module - FANUC

A06B-6079-H206
This FANUC 2-axis and reference A06B-6079-H206 is available to replace your equipment. SVM2-40/40 Input: 283-325V, Output: 5.3 kW, Output 230v ~ 12.5A / 12.5A This A06B-6079-H206 drive is at your disposal to replace your defective hardware and has a warranty adapted to your needs. Module reconditioned and tested under full load (duration test) on FANUC...
€1,179.00 €1,310.00
Time left
ATV58HD33N4 - Speed drive - TELEMECANIQUE
  • On sale!
  • -10%

ATV58HD33N4 - Speed drive - TELEMECANIQUE

ATV58HD33N4
This reference speed drive ATV58HD33N4 and branded SCHNEIDER / TELEMECANIQUE is a variable speed drive for asynchronous motors. ALTIVAR Series 58. Speed drive : 22kW, 48.4A, 3PH, 50 / 60Hz, 380 / 500V, SQUARE D. This ALTIVAR 58 (Schneider Electric) is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,742.40 €1,936.00
Time left
TSXDEY32D2K - Input Module - TELEMECANIQUE
  • On sale!
  • -15%

TSXDEY32D2K - Input Module - TELEMECANIQUE

TSXDEY32D2K
This analog input module TELEMECANIQUE is reference TSXDEY32D2K. It is part of the MODICON PREMIUM range 24 Volts / Positive logic. 32 entries. This TELEMECANIQUE input module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs. Module reconditioned and tested on PLC bench (Test 100%).
€93.50 €110.00
Time left
XBT HM027010 - HMI - TELEMECANIQUE
  • On sale!
  • -12%

XBT HM027010 - HMI - TELEMECANIQUE

XBT HM027010
This graphic terminal XBT HM027010 and brand TELEMECANIQUE is a terminal of the Magelis range. Matrix display, 8 lines, 40 characters, This XBT HM027010 Telemecanique terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€343.20 €390.00
Time left