1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY
1746-P2 - Power Supply Module - ALLEN BRADLEY

1746-P2 - Power Supply Module - ALLEN BRADLEY

1746-P2

This 1746-P2 and ALLEN BRADLEY brand power supply module is part of the SLC 500 range.

Line Voltage: 85-132 VAC / 170-265 VAC, 50/60 Hz. Fuse replacement 250V / 3A.

This 1746-P2 power supply module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Supply
Warranty
€100.00

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

SLC 500 controllers continue to operate for a short time if the input voltage of the power supply drops below the recommended operating voltage range. The controller continues to scan the user program and control the I / O during this time. Maintaining the processor for each power supply is shown on pages 14 and 16.

The SLC 500 controllers will turn off (stop scanning and disable outputs) if the power input voltage is cut off or falls below the recommended operating range for a period of time beyond the processor hold time. The controller resumes operation automatically when the input voltage returns to normal.
If the input voltage of the 1746-P7 power supply falls within a range of 4 to 9V for a period exceeding the CPU hold time, the controller turns off and on again as long as the input voltage is not increased to 11Vdc.

When configuring a modular system, you must have a powersupply for each  chassis.

Careful system configuration will result in optimal system performance. Excessive loading of the power supply outputs can cause a power supply shutdown or premature failure.

The SLC system features three AC power supplies and four DC power supplies. 

The power supply mounts on the left side of the chassis with two screws. For AC power supplies, 120/240 volt selection is made by placing the jumper to match the input voltage. SLC power supplies have an LED that illuminates when the power supply is functioning properly.

Power supplies are designed to withstand brief power losses. Power loss does not affect system operation for a period between 20 ms and 3 s, depending on the load.

Height
14,5 cm / 5,7 in
Width
14 cm / 5,5 in
Length
8,5 cm / 3,3 in
Weight
0,7 kg / 1,5 lb
Family
SLC 500
Reference
1746-P2
Refurbished
3003057166986
300311459901

Allen-Bradley is the brand-name of a line of Factory Automation Equipment manufactured by Rockwell Automation. The company, with revenues of approximately US $6.4 billion in 2013, manufactures programmable logic controllers (PLC), human-machine interfaces, sensors, safety components and systems, software, drives and drive systems, contactors, motor control centers, and systems of such products.
Rockwell Automation also provides asset-management services including repair and consulting. Rockwell Automation's headquarters is in Milwaukee, Wisconsin.

iqitcookielaw - module, put here your own cookie law text