C200H-TC103 - Temperature Control Unit - OMRON
This OMRON brand and C200H-TC103 temperature control unit belongs to the CS1 range.
Control module: 0.33A. RTD input, PID current output
This C200H-TC103 control module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
The Temperature Control Unit measures the temperature of an object with a connected temperature sensor (thermocouple or platinum resistance ther- mometer) and controls the temperature according to a preset control mode.
PID with Feed-forward Circuitry (Feed forward PID)
Stable temperature control is achieved using PID control with feed-forward cir- cuitry and an auto-tuning feature.
ON/OFF control can also be selected.
Two Temperature Control Loops with a Single Unit
Two versions of Temperature Control Unit are available: the C200H-TC00X for thermocouple use and the C200H-TC10X for platinum resistance thermome- ters, each offering two control loops.
Comprehensive Output Specifications
Three types of output specification versions are available: C200H-TCXX1 for transistor output, C200H-TCXX2 for voltage output, and C200H-TCXX3 for current output.
Heater Burnout Detection
Through a Current Transformer, heater burnout can be quickly detected with a minimum current difference of 0.5 A and a heater burnout detection setting range of 0.1 to 4.9 A, and allows for the rapid correction of problems. Heater burnout detection is possible for each of the two control loops.
Eight Banks of Data Settings
Eight data values such as set point (SP) and alarm set values can be preset in eight data banks for easy selection.
Data Input and Display
The C200H-DSC01 Data Setting Console (sold separately) is used to input data and display process values (PV) and set values (SV).
The easy-to-read display can be panel-mounted.
User Programs Allow Reading and Writing of Data
The 21 commands are used to read and set data with the C200H user programs.
Omron was created by Kazuma Tateish in 1933. Based in Kyoto, Japan, Omron Corporation is a global leader in automation. Headed by President Yoshihito Yamada, Omron has approximately 37,000 employees in more than 36 countries who offer products and services in various areas, including automation components and systems, electronic components and medical and paramedical products.