6ES5470-8MD12 - Analog Output Module - SIEMENS
This SIEMENS 6ES5470-8MD12 reference module is part of the SIMATIC S5 range. S5-100U.
SIMATIC S5 470 ANALOG OUTPUT MODULE FLOATING, FOR S5-90U/-95U/-100U ET 100U, ET 200U 2 OUTPUTS +1 TO 5V
This 6ES5470-8MD12 analog output module is available as a supply to replace your defective equipment and has a guarantee adapted to your needs.
The analog output modules convert the digital values from the programmable controller into analog signals required by the process.
Three analog output modules are available with eight out puts each and a range of out put voltages. The modules require one slot.
Front connectors are used for terminating the signal cables. Modules and front connectors may be inserted and removed under power.
Adhesive labels are supplied for identifying modules and front connectors.
The enable input can be used to disable the output of new values. The last output value is retained. The enable input can be deactivated by removing the respective jumper on the module.
Analog output modules convert the bit patterns that are output by the CPU into analog output voltages or currents.
No adjustments are necessary if you want to connect loads to the analog outputs.
Check the following items before connecting loads.
• The load voltage 24 V DC must be connected to terminals 1 and 2.
• The maximum permissible potential difference between the outputs is 60 V AC (for this purpose it might be necessary to earth the actuator or
• Unused outputs must be left open-circuited.
Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.