16.F5.CDE-340A - Drive speed controller - KEB
Drive speed controller KEB reference 16.F5.CDE-340A. Range COMBIVERT F5.
Features : 50/60HZ - 15kW 3ph - Speed controller with open or closed loops
This 16.F5.CDE-340A is at your disposal to replace your defective material and has a warranty adapted to your needs.
AC inverter tested on engine test bench.
BASIC
Frequency inverter 0.37 … 15 kW
- the new class of compact,functional and economical units
COMPACT
Frequency inverter 0.37 … 90 kW
- universal features form the basis for the design of high quality machines and systems
MULTI
Closed loop drive technology 0,37 … 800 kW
- one unit for asynchronous and synchronous servo motors with feedback from :
• resolver
• incremental encoder
• Sin / Cos - encoder
• absolute encoder
• HIPERFACE® and ENDAT®
BASIC
The new frequency inverter class for simple to sophisticated tasks throughout the mechanical engineering sector…
• connection 1/3 phase 230 V and 3 phase 400 V optional AC- or DC-supply in one unit
• optimized KEB - SMM control procedure (sensorless motor management)
• 17 pluggable control terminals, PNP-logic
• analog input 0…10 V, ± 10 V, 0/ 4 … 20 mA (housing D, E)
• programmable analog output 0…10 V
• 5 programmable digital inputs
• 2 programmable relay outputs
• 4 programmable software inputs/outputs
• 8 free-to-programm parameter sets including S-curve, ramp stop, Power-Off-function, DC-braking, PID technology regulator, electronic motor protection, brake control, internal timer, counter input
• output frequencies up to 1600 Hz, output voltage control, adjustable switching frequencies up to 16 kHz
• controlled positioning to end position
• high-dynamic sampling of the control terminals and the serial interface in less than 2 ms
• + / - intermediate circuit connection, internal braking chopper motor-PTC-evaluation, hardware current control
• integrated filter according to EN 55011/B (option: B, D, E-housing)
COMPACT
- More than just a frequency inverter - Leading technique for controlled drive systems
▲ wide power range for 230 V- and 400 V-connection
▲ optional AC- or DC-connection
▲ optimal performance at motor shaft in various areas of application with KEB - SMM (sensorless motor management)
▲ 29 plug-in control terminals
▲ 2 analog inputs 0… 10 V, ± 10 V, 0/4… 20 mA
▲ 2 programmable analog outputs 0… 10 V
▲ 8 programmable digital inputs
▲ programmable outputs: 2 x relay, 2 x transistor
▲ 4 programmable software inputs/outputs
▲ 8 freely programmable parameter sets including S curves, ramp stop, Power-Off-function, DC-braking, PID technology regulator, electronic motor protection, brake control, internal timer, counter input, output frequencies up to 1600 Hz, output voltage control, switching frequencies up to 16 kHz, output phase monitoring
▲ sampling time of the control terminals 2 ms
▲ ± intermediate circuit connection, internal braking chopper (in series up to housing size G), motor-PTC-analysis, hardware current control
▲ controlled positioning to end position/counting pulse
▲ optional: protection against accidental restart by voltage-free switching in driver section
MULTI
the universal open and closed loop drive controller for synchronous and asynchronous motors equipped with all functions and characteristics of the KEB COMBIVERT F5 - Compact series, especially prepared for regulated use.
Particularly variable through plug-in feedback:
- RESOLVER
- TTL or HTL INCREMENTAL ENCODER, INITIATOR
- SIN/COS- ENCODER
- ABSOLUTE VALUE ENCODER
- HIPERFACE®, ENDAT®
or Tacho optional in the operation methods
KEB-SMM (sensorless motor management) as : F5-G
Field-oriented control : F5-M
Synchronous motor control : F5-S
Decentralized automation in the drive actuator with
◆ speed and torque control
◆ position control
◆ synchro-control, electronic gears or customized solutions like:
- cam switches
- electronic cams
- single-axis positioning
- rotary indexing positioning
- register function relieves load on higher control systems and creates clear, compact programs.
For 40 years, KEB has been developing, producing and marketing a complete range of solutions related to power transmission technologies.
KEB is a recognized specialist in frequency variation, electromagnetic clutches and brakes and motor drives, with more than 1,500 people, and production facilities in Europe and China in the United States.