Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY
1305-BA04A - Frequency inverter - ALLEN BRADLEY

1305-BA04A - Frequency inverter - ALLEN BRADLEY

1305-BA04A

This ALLEN BRADLEY reference 1305-BA04A variable frequency drive is a 1305-Serie C drive.

Frequency converter: 380...460V, Input: 1.5kW, 3.9A; Output: 4A.

This ALLEN BRADLEY variable speed drive is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

In stock, ready to ship.
State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€540.00
VAT excluded

System options

Exchange service with a refurbished unit

Standard Exchange Service

Reconditioned and tested systems

From 6 to 12
month warranty

Exchange service with a new unit

Standard Exchange Service

New systems

From 12 to 24
month warranty

Supply of a refurbished unit

Supply Service

Reconditioned and tested systems

From 6 to 12
month warranty

Supply of a new unit

Supply Service

New systems

From 12 to 24
month warranty

For parts only

Supply Service

Sold for parts – no warranty

Repair

Repair service

Repair will be made to damaged and defectiv units

From 3 to 18
month warranty

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

Increased torque at low speed.

The [% COMP. RI] has been added, allowing adjustment of the amount of RI compensation desired. This option is used to compensate for stator resistance and allow higher levels of starting torque. The default [START BOOST] levels and the operation of the [INSTABILITY] parameter have changed. The default setting for [INSTABILITY] is now “Comp. and operates from 1.1 to 120 Hertz.

Improved acceleration.

The setting of the current regulator on the acceleration ramp has been modified and the time constant of the current feedback filter reduced, allowing improved performance with short accelerations under all load conditions. Drive power-up diagnostics have been dramatically shortened, improving run command response time. The [LIM. I ADAPTIVE] has also been added for very fast, low inertia system accelerations.

Hard current limit.

A fast frequency fallback has been added to match the drop in hardware current limit. This allows the drive to continue to operate, even under harsh conditions.

Improved speed regulation.

The [NOMIN SLIP] parameter has been added, which compensates for the inherent slip of an induction motor. This helps maintain the frequency of the induction motor shaft under heavy load conditions. The actual frequency value added can be viewed in [COMP. add. AT THE GLIS].

Reduced motor voltage correction.

The motor voltage reduction software is activated when [CABLE LENGTH] = "Long". This software tries to limit the motor voltage.

Improved drive functionality.

The [ANALOG FILTER] setting has been added. This allows you to select the amount of software filtering applied to the 0-10V and potentiometer inputs by

25% increments. The lower the percentage, the less filtering. The “DC Braking” stop mode has been greatly improved by incorporating a current limit feature into this stop mode. The [MAINTEN. DC] is now adjustable up to 150s in 0.1s increments and [MAX VOLTAGE] is now adjustable up to 110% of the drive rated voltage. Several other settings now have new factory defaults.

If operating the drive at or near the maximum operating temperature (+50°C), the following derating guidelines are recommended as protection against overheating, depending on the application and operating conditions . For derating guidelines at ambient temperatures between +40°C and +50°C, consult Allen-Bradley

Height
18 cm / 7 in
Width
17 cm / 6,6 in
Length
19.5 cm / 7.67 in
Weight
3.7 kg / 8.16 lbs
Family
1305-Serie C
Reference
1305-BA04A

Allen-Bradley is the brand-name of a line of Factory Automation Equipment manufactured by Rockwell Automation. The company, with revenues of approximately US $6.4 billion in 2013, manufactures programmable logic controllers (PLC), human-machine interfaces, sensors, safety components and systems, software, drives and drive systems, contactors, motor control centers, and systems of such products.
Rockwell Automation also provides asset-management services including repair and consulting. Rockwell Automation's headquarters is in Milwaukee, Wisconsin.

16 other products in the same category: