6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS
6SN1145-1BA01-0BA2 - Power Supply - SIEMENS

6SN1145-1BA01-0BA2 - Power Supply - SIEMENS

6SN1145-1BA01-0BA2

This reference SIEMENS (16/21 kw) power supply 6SN1145-1BA01-0BA2 is for sale in exchange or standard.

Simodrive 6SN1145-1BA01-0BA2 power supply, reconditioned and tested under full load (time test) on Siemens 611D bench.

This power supply is at your disposal to replace your defective hardware and has a functional guarantee adapted to your needs.

State
  • Refurbished Service Exchange
  • Refurbished Supply
Warranty
€1,240.00

Options produits

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Livraison
rapide

Livraison rapide

Produits
garantis

Livraison rapide

Paiement
sécurisé

 

The entire drive unit is connected to the supply network via the power supply modules. The power supply / recovery module (A / R module) and the non-stabilized supply module (AN module) allow power to be supplied to the DC intermediate circuit. In addition, the A / R, AN and monitoring modules (MS module) also supply power to the electronics of the connected modules.

In the case of the AN module, the energy of the drives reinjected into the intermediate circuit in motor braking mode is converted into thermal energy and dissipated in the environment in the braking resistors to be integrated or added.
If necessary, one or more pulsed resistance modules
(RP modules) can also be integrated within the configuration limits. This module is used to:

- machines with short and short braking cycles, generating a low level of braking energy,

- sets of drive units with low dynamic requirements, particularly for spindle drive.

Adaptation of the network supply modules to the existing network conditions is carried out on switches S1.1 and S1.4.
The drive is designed for use in industrial environments with grounded TN-S and TN-C (VDE 0100, Part 300). For the other network topologies, a transformer equipped with separate windings in the secondary coupling yn must be inserted upstream.

Height
10 cm / 3,9 in
Width
28 cm / 11 in
Length
48
Weight
11 kg / 24,2 lbs
Family
SIMODRIVE
Reference
6SN1145-1BA01-0BA2
Refurbished
3006766551692
300292255745

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66