XBT RT500 - Compact Display - TELEMECANIQUE
This compact display XBT RT500 and brand TELEMECANIQUE is a terminal of the Magelis range.
5 VDC supplied by the PLC. For specific cables, see Connecting the XBT Terminals. 10 x 33 characters
This XBT RT500 Telemecanique terminal is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Magelis XBT N terminals and Magelis XBT R / RT terminals allow the representation of messages and variables.
In addition, Magelis XBT RT terminals can display small graphic elements.
The different keys allow:
- Modification of variables.
- Control of equipment.
- Navigating in the operator dialogue application.
On XBT RT terminals, the touch screen can also be used to modulate variables, control equipment, and navigate through the dialog application.
Models equipped with a printer link enable printing of alarm messages.
All Magelis terminals benefit from the same ergonomics:
B A touch screen con gurable, on XBT RT only ("touch" mode).
B 2 service keys (,) can be configured for contextual link or command, on XBT N / R and XBT RT ("input" / "command" modes).
B 2 service keys (ESC, ENTER) can not be configured.
B These keys are completed by:
V XBT N terminals: 4 customizable keys that can be configured as function keys ("command" mode) or services ("input" mode)
V XBT terminals R terminals: 4 non-configurable service keys and 12 function or numeric entry keys (depending on context),
V XBT RT terminals in "command" or "input" mode: 4 customizable and configurable function keys. 4 service keys not configurable.
The XBT RT terminals come with 2 sheets of insert labels that provide the following types of labels to assign different text or symbols to the keys:
- Service key labels
- function key labels
- touch labels
- Blank labels
All labels are pre-cut and must be pressed out of the label sheet.
The ready-to-use service key, function key, and touch-sensitive label can be directly inserted into the XBT RT terminal as described in Insert Insertion Labels on page 49.
To print your own text or symbols on blank labels, use the Vijeo-Designer Lite configuration software.
To print your own text or symbols on blank labels, use the Vijeo-Designer Lite configuration software.
If you have configured your XBT RT terminal for the input variant in the Vijeo-Designer Lite configuration software, insert the following service key label into your XBT RT terminal.
If you have configured your XBT RT terminal for the control variant in the Vijeo-Designer Lite configuration software, insert the following function key label into your XBT RT terminal.
If you have configured your XBT RT terminal for a touch variant in the Vijeo-Designer Lite configuration software, insert the following touch pad label into your XBT RT terminal.
The Insert Label Sheet contains blank labels allowing you to create labels with your own text or symbols.
Since its creation, the Telemecanique brand has been pursuing an innovation policy, which has become one of the world’s first references in automatism management.
The story of Telemécanique is read through that of its inventions, initiated with the launch of the first contactor on bars. A patent filed the same year of its acquisition, in 1924! It will develop contactors D became world reference. The 1980s marked the acquisition of Telemechanics by Schneider Electric (1988).