6FC5203-0AB00-0AA0 - Operator Panel - SIEMENS
SIEMENS operator panel reference 6FC5203-0AB00-0AA0 for SINUMERIK.
SINUMERIK FM-NC/810D/DE/840D/DE OP030 SLIMLINE OPERATOR PANEL WITH SYSTEM SOFTWARE MONOCHROME / 240 X 128 PIXELS
This OP SIEMENS 6FC5203-0AB00-0AA0 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
The OP 030 must be connected to a SINUMERIK 840D/810D via MPI. The software version of the SINUMERIK 840D/810D must be approved for the OP 030.
OEM-specific extensions, such as PLC alarms and message texts and any dedicated user interface components, must be installed on the OP 030 for operation with a machine tool.
The software on the OP 030 can be updated with the OP 030 screen kit.
After Power ON or Reset the OP 030 runs up, displays the version and tries to make contact with the NC for approx. 90 seconds. If this is not successful, it must be acknowledged before a new attempt can be made.
During the runup period the "+" and "-" keys can be used to set the brightness of the screen display. "+" increases the brightness. Unfortunately, this setting is not accepted in the executable HMI program.
Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.