6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS
6FC5357-0BB11-0AE0 - NCU Module - SIEMENS

6FC5357-0BB11-0AE0 - NCU Module - SIEMENS

6FC5357-0BB11-0AE0

This NCU 6FC5357-0BB11-0AE0 and SIEMENS is a numeric control unit of the SINUMERIK 840D range.

SINUMERIK 840DE NCU 571.2 SOFTWARE MEMORY SYSTEM: NC 0.5 MB, API 96 KB PREP. PROFIBUS-DP.

This NCU 6FC5357-0BB11-0AE0 SIEMENS is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

State
  • Refurbished Supply
Warranty
€720.00

Services options

échange standard reconditionné

Service échange standard

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

échange standard neuf

Service échange standard

Systèmes neufs

Garantie de
12 à 24 mois

fourniture reconditionnée

Service fourniture

Systèmes reconditionnés et testés

Garantie de
6 à 12 mois

fourniture neuve

Service fourniture

Systèmes neufs

Garantie de
12 à 24 mois

fourniture pour pièces

Service fourniture

Systèmes vendus pour pièces

réparation

Service réparation

Reconditionnement de systèmes endommagés

Garantie de
6 à 12 mois

Livraison rapide

Fast
delivery

Livraison rapide

guaranteed
products

Livraison rapide

Secure
payment

 

The components of the SINUMERIK 840D are compatible with the module se- ries SIMODRIVE 611D. The 840D is operated with the power supply of SIMODRIVE 611 and the SIMODRIVE 611D drive modules.
The NCU module (Numeric Control Unit) is the CPU of the SINUMERIK 840D. It takes over all the CNC, PLC and communication tasks

The NCU box is the module rack of the NCU module and consists of:
- NC rack assembly with cable distributor
- Battery/fan slide-in module
- Sheet metal housing with integrated guide bars for accommodating the NCU and the fan/battery slide-in modules and power supply unit.

The fan box is absolutely required for the 573.3 (Pentium III) and 573.4 (Pen- tium III) NCUs. Mount the fan box to the NCU box if necessary.

As a submodule of the NCU, the PLC module supports machine monitoring and represents a PLC-CPU that is compatible to the S7-300 family of products. Via the P bus, three external lines can be connected for every eight S7-300 periph- eral modules.

The COM module is a submodule of the NCU. It is used for communication with the PCU and peripherals.

The driver module is a submodule of the NCU (...-...-0AEx). It forms the inter- face to the operator panel front, to the programming device, to the decentralized peripherals and to S7-300 peripherals.

The NCU contains a plug-in unit for standard PCMCIA cards (PC card or NC card), via which all flash cards of type II up to 8 MB storage capacity can be operated.
The PCMCIA card serves as a bulk memory for the NC system software (NC card).

Height
32 cm / 12,5 in
Width
14 cm / 5,5 in
Length
5 cm / 1,9 in
Weight
0,7 kg / 1,5 lb
Family
SINUMERIK
Reference
6FC5357-0BB11-0AE0
Refurbished
3004708850674
300266305018

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

12 other products in the same category:

www.standard-exchange-industry.com is getting a new look !

We are tweaking the last settings, in the meantime the orders are temporarily disabled.

However, don't hesitate to check out our new website!

For all information, contact us by e-mail on contact@standard-exchange-industry.com or by phone on +33 3 24 52 97 66