Your cart
There are no more items in your cart
6FC5357-0BB35-0AA0 - NCU Module - SIEMENS
6FC5357-0BB35-0AA0
This NCU 6FC5357-0BB35-0AA0 and SIEMENS brand is a CPU of the range SINUMERIK 840D.
SINUMERIK 840D/DE CNC-HARDWARE NCU 573.5, 933 MHZ, 64 MB WITHOUT SYSTEM SOFTWARE MEMORY: NC 3 MB, PLC 128 KB PREPARED FOR PROFIBUS DP
This NCU 6FC5357-0BB35-0AA0 SIEMENS is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
Standard Exchange Service
Reconditioned and tested systems
From 6 to 12
month warranty
Standard Exchange Service
New systems
From 12 to 24
month warranty
Supply Service
Reconditioned and tested systems
From 6 to 12
month warranty
Supply Service
New systems
From 12 to 24
month warranty
Supply Service
Sold for parts – no warranty
Repair service
Repair will be made to damaged and defectiv units
From 3 to 18
month warranty
Fast
delivery
guaranteed
products
Secure
payment
The components of the SINUMERIK 840D are compatible with the module se- ries SIMODRIVE 611D. The 840D is operated with the power supply of SIMODRIVE 611 and the SIMODRIVE 611D drive modules.
The NCU module (Numeric Control Unit) is the CPU of the SINUMERIK 840D. It takes over all the CNC, PLC and communication tasks
The NCU box is the module rack of the NCU module and consists of:
- NC rack assembly with cable distributor
- Battery/fan slide-in module
- Sheet metal housing with integrated guide bars for accommodating the NCU and the fan/battery slide-in modules and power supply unit.
The fan box is absolutely required for the 573.3 (Pentium III) and 573.4 (Pen- tium III) NCUs. Mount the fan box to the NCU box if necessary.
As a submodule of the NCU, the PLC module supports machine monitoring and represents a PLC-CPU that is compatible to the S7-300 family of products. Via the P bus, three external lines can be connected for every eight S7-300 periph- eral modules.
The COM module is a submodule of the NCU. It is used for communication with the PCU and peripherals.
The driver module is a submodule of the NCU (...-...-0AEx). It forms the inter- face to the operator panel front, to the programming device, to the decentralized peripherals and to S7-300 peripherals.
The NCU contains a plug-in unit for standard PCMCIA cards (PC card or NC card), via which all flash cards of type II up to 8 MB storage capacity can be operated.
The PCMCIA card serves as a bulk memory for the NC system software (NC card).
- Height
- 32 cm / 12,5 in
- Width
- 23 cm / 9 in
- Length
- 5 cm / 1,9 in
- Weight
- 1 kg / 2,2 lbs
- Family
- SINUMERIK
- Reference
- 6FC5357-0BB35-0AA0
Refurbished
3008606532229
300265636816
Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.
16 other products in the same category:
Tap to zoom
