6FC5210-0DF22-0AA0 - PCU - SIEMENS Expand

6FC5210-0DF22-0AA0 - PCU - SIEMENS

SIEMENS SIEMENS

Refurbished

This CPU 6FC5210-0DF22-0AA0 and SIEMENS brand is a PCU of the range SINUMERIK 810D.

SINUMERIK PCU 50 1.2 GHZ; 256 MB RAM; 24 V DC; WINDOWS NT WORKSTATION V4 FOR EMBEDDED SYSTEMS (WINNT4.0 WS EMBSYS)

This Siemens 6FC5210-0DF22-0AA0 PCU is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.

More details

In stock, shipping within 24h.

2 630,00 €

Livraison : 1 à 3 semaines

livraison-2.pngQuick delivery

garantis2.pngWarranted systems

paiement-securise-SEI_1.jpgSecure Payment 


Product options

standard exchange refurbished

Standard exchange service

Reconditioned and tested systems
6 to 12 months warranty

new systems

Standard exchange service

New systems
12 to 24 months warranty

supply refurbished

Supply service

Reconditioned and tested systems
6 to 12 months warranty

supply new

Supply service

New systems
12 to 24 months warranty

supply in the state

Supply service

Systems sold in the state
without warranty

The hardware structure of ShopMill corresponds to the SINUMERIK 810D/840D/840Di standard.
References:
/PHC/, SINUMERIK 810D, Configuring Manual
/IAC/, SINUMERIK 810D, Installation & Start-up Guide
/PHD/, SINUMERIK 840D, Configuring Manual NCU 561.2-573.3
/IAD/, SINUMERIK 840D/SIMODRIVE 611D,
Installation & Start-up Guide
/HBI/, SINUMERIK 840Di, Manual

Observe the following conditions when using ShopMill:

- ShopMill is only executed in channel 1, mode group 1.
- The standard MPI bus addresses must not be changed for the PCU 20, PCU 50, NC, and PLC.
- Up to 5 axes plus a spindle are displayed on the ShopMill operator interface.
- The machine axes are assigned to fixed numbers (1=X, 2=Y, 3=Z).
- The spindle can be assigned to axis numbers 4, 5, or 6. - ShopMill is executed only with tool management. The change position must always be spindle 1 (see configuration file).
The loading point can be 1 or 2 (see MD 9673 $MM_CMM_TOOL_LOAD_STATION).
- In ShopMill Classic, the position of the “ShopMill” softkey (switch from the CNC-ISO user interface to ShopMill) must not change, i.e. in the REGIE.INI file this function must always be assigned Task6.
- In ShopMill Open, you must not change the positions of the following softkeys on the basic menu bar, i.e. a certain task must always be assigned to these functions in the REGIE.INI file.
Task 0 (horizontal softkey 1): Machine operating area
Task 1 (horizontal softkey 2): Program manager operating area
Task 2 (horizontal softkey 3): Program operating area
Task 4 (horizontal softkey 5): Tools/zero offsets operating area
- You can use only one operator panel with ShopMill.
- Handheld programming unit (HHU) in addition to ShopMill on PCU 50 on request only.
- The HMI and Windows screen savers must not be used at the same time.
References:
/IAM/, IM2 Installation and Start-up of HMI Embedded IM4 Installation and Start-up of HMI Advanced

Height 10 cm / 3,9 in
Width 28 cm / 11 in
Length 34 cm / 13,3 in
Weight 5 kg / 11 lbs
Family SINUMERIK
Reference 6FC5210-0DF22-0AA0

If Service exchange, thank you describe below the defect found on your defective part.
Allowed file formats are: GIF, JPG, PNG

loader

* required fields

No customer reviews for the moment.

Write a review

Siemens is an international group of German origin specializing in high technology and present in the sectors of industry, energy and health. It was founded in 1847 by Werner von Siemens.

Accept

On this site, we use tools that store cookies on your device. Cookies are used to enable the site to function properly, to generate statistical reports and to advertise our services / products. With these cookies, you help us to offer you a better user experience.