JANCD-XCP01-1 - CPU Control Board - YASKAWA
YASKAWA CPU and reference card JANCD-XCP01-1 is used with the XRC MOTOMAN controller.
Includes JANCD-XIF03-1 and JANCD-XMM01-2 cards
This CPU JANCD-XCP01-1 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.
The JANCD-XIF02 Ethernet interface board for the XRC, hereinafter referred to as the XIF02 board, allows data to be transmitted with the Ethernet as a transmission medium. (Ethernet is a registered trademark of Xerox Corporation, U.S.A.) The XIF02 board must be installed on the JANCD-XCP02 optional base board for the XRC, hereinafter referred to as the XCP02 board. The XIF02 board uses TCP/IP, a general transmission standard used by the Ethernet, as a communication protocol(TCP/IP: Transmission Control Protocol / Internet Protocol).
The XIF02 board uses the Ethernet as a transmission medium. Since the transmission speed of the Ethernet is 10 Mbps, higher-speed communication can be provided when compared with conventional serial communication using the R232C at 9600 bps.
The Ethernet is a bus-type LAN so a multiple number of stations can be connected on one transmission line. Therefore, without changing the connection, communication is made with another station by specifying the target station. The communication stations include XRC connected with the XIF02 board and personal computers connected with network boards.
Since network communication is processed by the CPU used exclusively for the XIF02 board, robot performance will never deteriorate.
Yaskawa The company was founded in 1915 and its headquarters is located in Kitakyushu, Japan.
The company is the world leading manufacturer of servo motors, converters, axis drives and control systems used in industrial automation, and Motoman robots.