Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Cards / Boards

6SN1118-0DM23-0AA0 - Control Board - SIEMENS

6SN1118-0DM23-0AA0
SIEMENS 2-axis digital reference control board 6SN1118-0DM23-0AA0 for digital drive. SIMODRIVE 611-D BOITIER DE FERMETURE À BOUCLE FERMÉE, 2 AXES, STANDARD FERMÉ- CONTRÔLE BOUCLE 2, AVEC SYSTÈME DE MESURE DIRECTE SPG-S, MAX. 2 AXES FDD OU 1 AXIS MSD. Card reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1...
€150.00

SX-101 - Card - MITSUBISHI

SX-101
Mitsubishi inverter card reference SX-101 / BD625A553H05. This card is installed in the FREQROL inverters FR-SX series.
€990.00

6SN1118-0DM13-0AA1 - Control Board - SIEMENS

6SN1118-0DM13-0AA1
Digital control board SIEMENS 2 axis, reference 6SN1118-0DM13-0AA1 for digital drives without direct measurement system. SIMODRIVE 611-D PLUG-IN CLOSED-LOOP CONTROL UNIT, 2-AXES VERS., FOR DIGITAL DRIVE, FDD + MSD, W. DIRECT MEASURING SYSTEM, STANDARD CLOSED-LOOP CONTROL, VOLTAGE SIGNALS System reconditioned and tested under full load (test duration) on...
€210.00

6SN1118-0DM11-0AA1 - Control Board - SIEMENS

6SN1118-0DM11-0AA1
SIEMENS 2-axis and reference digital control board 6SN1118-0DM11-0AA1. SIMODRIVE 611-D PLUG-IN CLOSED-LOOP CONTROL UNIT, 2-AXES VERS., FOR DIGITAL DRIVE, FDD + MSD, W/O DIRECT MEASURING SYSTEM, STANDARD CLOSED-LOOP CONTROL System reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€210.00

6SN1118-0DH23-0AA1 - Control Board - SIEMENS

6SN1118-0DH23-0AA1
Digital control board SIEMENS reference 6SN1118-0DH23-0AA1. SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT,2-AXES,FOR DIGITAL DRIVES,FEED+MAIN SPINDLE DRIVES WITH DIRECT MEASURING SYSTEM VOLTAGE SIGNALS Control board reconditioned and tested under full load (time test) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€980.00

6SN1118-0DH23-0AA0 - Control Board - SIEMENS

6SN1118-0DH23-0AA0
Digital control board SIEMENS reference 6SN1118-0DH23-0AA0.SIMODRIVE 611-D CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, STANDARD CLOSED- LOOP CONTROL 2, WITH DIRECT MEASURING SYSTEM SPG-S, MAX. 2 AXES FDD OR 1 AXIS MSD. Control board reconditioned and tested under full load (time test) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€710.00

6SN1118-0DG23-0AA0 - Control Board - SIEMENS

6SN1118-0DG23-0AA0
Digital control board SIEMENS reference. 1 axis 6SN1118-0DG23-0AA0. SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT,1 AXIS,FOR DIGITAL DRIVES,FEED+MAIN SPINDLE DRIVES WITH DIRECT MEASURING SYSTEM, VOLTAGE SIGNALS Card reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€120.00

6SN1118-0DG21-0AA1 - Control Board - SIEMENS

6SN1118-0DG21-0AA1
SIEMENS digital control board 1 reference axis 6SN1118-0DG21-0AA1 for digital drive. SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT,1 AXIS,FOR DIGITAL DRIVES,FEED+MAIN SPINDLE DRIVES Card reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€170.00

6SN1118-0DG21-0AA0 - Control Board - SIEMENS

6SN1118-0DG21-0AA0
SIEMENS digital control board 1 reference axis 6SN1118-0DG21-0AA0 for digital drive. SIMODRIVE 611-D CLOSED-LOOP PLUG-IN CONTROL UNIT 1 AXIS, FOR DIGITAL DRIVES FEED+MAIN SPINDLE DRIVES, W/O DIRECT MEASURING SYSTEM, PERFORMANCE CLOSED-LOOP CONTROL Card reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1...
€120.00

SX-CPU2 - CPU Card - MITSUBISHI

SX-CPU2
Mitsubishi CPUMitsubishi CPU-CPU SX 2 / BD625A552H04.This card is installed in the FREQROL inverters FR-SX series
€700.00

6SN1118-1NH01-0AA1 - Control Board - SIEMENS

6SN1118-1NH01-0AA1
SIEMENS 2-axis and reference control board 6SN1118-1NH01-0AA1 for incremental encoder SIN / COS 1VCA, and absolute encoder. SIMODRIVE 611 UNIVERSAL HR 2-AXIS CONTROL-LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1 VPP ABSOLUTE VALUE ENCODER ENDAT SPEED/TORQUE SETPOINT POSITIONING EXPANDABLE BY OPTIONS Card reconditioned and tested under full load.
€230.00

6SN1114-0NA00-0AA0 - Option Card - SIEMENS

6SN1114-0NA00-0AA0
Optional expansion card for SIEMENS 6SN1114-0NA00-0AA0 reference terminals for SIMODRIVE 611 card. Board with digital input 24V, 8 digital outputs 24V / 500 mA, and galvanic isolation. Option card SIEMENS for 6SN1118-0NH01-0AA1 or others. Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€190.00

6SN1118-0DG23-0AA1 - Control Board - SIEMENS

6SN1118-0DG23-0AA1
SIEMENS control board 1 reference axis 6SN1118-0DG23-0AA1 for digital drive.cSIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT,1 AXIS,FOR DIGITAL DRIVES,FEED+MAIN SPINDLE DRIVES WITH DIRECT MEASURING SYSTEM, VOLTAGE SIGNALS Card reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€160.00

JUSP-WSCA01AA + JUSP-WSCB01AA - Amplifier - YASKAWA

JUSP-WSCA01AA + JUSP-WSCB01AA
This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA and YASKAWA is a amplifier for XRC robot control unit. 100W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCA01AA + JUSP-WSCB01AA is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€320.00

JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCA05AA+WSCD05AA
This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCA05AA + JUSP-WSCD05AA is at your disposal to replace your defective hardware.
€310.00

JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA - Amplifier - YASKAWA

JUSP-WSCD10AA+WSCA10AA+WSCB10AA
This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA and YASKAWA brand is a drive for XRC robot control unit. 1kW Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCD10AA+JUSP-WSCA10AA+JUSP-WSCB10AA is at your disposal to replace your defective hardware.
€640.00

JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA - Amplifier - YASKAWA

JUSP-WSCB05AA+WSCB05AA+WSCD10AA
This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA and YASKAWA brand is a drive for XRC robot control unit. 500W Amplifier for Servopack CACR-UP6AAC, CACR-SV3AAA This amplifier JUSP-WSCB05AA + JUSP-WSCB05AA + JUSP-WSCD10AA is at your disposal to replace your defective hardware.
€410.00

JUSP-ACPA05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACPA05JAA + JUSP-ACPCB05JAA
This YASKAWA converter is composed of 2 modules: JUSP-ACPA05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.
€920.00

JUSP-RCP01AAC - Power Supply Module - YASKAWA

JUSP-RCP01AAC
This YASKAWA power supply module is reference JUSP-RCP01AAC. It is used several YASKAWA servopacks. This power supply module generates a DC power supply (+ 5V, + 7V, ± 15V) for servo control. The AC input (single phase: 200/220 VAC) is provided by the power supply. This YASKAWA module is at your disposal to replace your defective equipment.
€420.00

VW3A3501 - Option Card - TELEMECANIQUE

VW3A3501
Programmable option card for TELEMECANIQUE dimmer. Compatible with Altivar 61; 71, Lift, 61Q and 71Q. 24 volts. 2 analog inputs. 2 analog outputs. Program compilation size: 320 kB maximum.
€320.00

6SN1118-0AE11-0AA0 - Control board - SIEMENS

6SN1118-0AE11-0AA0
SIEMENS control board 2 reference axes 6SN1118-0AE11-0AA0 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 2 AXES, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€495.00

6SN1118-0DJ21-0AA1 - Control Board - SIEMENS

6SN1118-0DJ21-0AA1
SIEMENS control board 1 reference axis 6SN1118-0DJ21-0AA1 for digital drive. SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH PERFORMANCE, 1 AXIS SIN/COS 1 VPP NC SOFTWARE Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€760.00

6SN1118-0AD11-0AA1 - Control board - SIEMENS

6SN1118-0AD11-0AA1
SIEMENS control board 1 reference axis 6SN1118-0AD11-0AA1 for digital drive. SIMODRIVE 611-A PLUG-IN CLOSED-LOOP CONTROL UNIT, 1-AXIS, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€290.00
6SN1118-0AA11-0AA1 - Control Board - SIEMENS
  • On sale!

6SN1118-0AA11-0AA1 - Control Board - SIEMENS

6SN1118-0AA11-0AA1
SIEMENS control board 1 reference axis 6SN1118-0AA11-0AA1 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 1 AXIS, FOR FEED DRIVES WITH 1FT5, ENHANCED INTERFACE This module SIEMENS 6SN1118-0AA11-0AA1 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€145.00

6SN1118-0DH21-0AA1 - Control Board - SIEMENS

6SN1118-0DH21-0AA1
SIEMENS control board 2 axes reference 6SN1118-0DH21-0AA1 for digital drive. SIMODRIVE 611-D CLOSED-LOOP PLUG-IN PERFORMANCE CONTROL UNIT,2-AXES,FOR DIGITAL DRIVES,FEED+MAIN SPINDLE DRIVES W/O DIRECT MEASURING SYSTEM Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€770.00

6SN1121-0BA12-0AA0 - Control Board - SIEMENS

6SN1121-0BA12-0AA0
SIEMENS control board 2 reference axes 6SN1121-0BA12-0AA0 for main drive. SIMODRIVE 611-A CLOSED CAP CLOSED CONTROL UNIT FOR MAIN DRIVE OF THE SPINDLE WITH 1PH, DIRECT TTL MEASURING SYSTEM Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€1,420.00

6SN1118-1NH01-0AA0 - Control Board - SIEMENS

6SN1118-1NH01-0AA0
SIEMENS 2-axis control board, order number 6SN1118-1NH01-0AA0 for digital drive. SIMODRIVE 611 UNIVERSAL HR 2-AXIS CONTROL LOOP BLOCK INCREMENTAL ENCODER SIN/COS 1 VPP ABSOLUTE VALUE ENCODER ENDAT SPEED-/TORQUE SETPOINT EXPANDABLE BY OPTIONS Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS...
€350.00

6SN1118-0NK00-0AA2 - Control Board - SIEMENS

6SN1118-0NK00-0AA2
SIEMENS 2-axis control board, reference 6SN1118-0NK00-0AA2 for digital drive. SIMODRIVE 611 UNIVERSAL DIGITAL CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, RESOLVER, ANALOG SETPOINT INTERFACE, SPEED CONTROL FOR 1FT6, 1FK6, 1PH2 STANDARD MOTORS PREP. OPTION SLOT Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive...
€1,360.00

6SN1118-0DM31-0AA0 - Control Board - SIEMENS

6SN1118-0DM31-0AA0
SIEMENS 2-axis and reference digital control board 6SN1118-0DM31-0AA0. SIMODRIVE 611 DIGITAL CONTROL LOOP BLOCK HIGH STANDARD, 2 AXES SIN/COS 1 VPP, NC SOFTWARE System reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€170.00

6SN1151-1CX20-2AE0 - Control Board - SIEMENS

6SN1151-1CX20-2AE0
SIEMENS 2-axis and reference digital control board 6SN1151-1CX20-2AE0. This SIEMENS 6SN1151-1CX20-2AE0 module is at your disposal to replace your defective equipment and has a warranty adapted to your needs. System reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€2,140.00

6SN1118-0DJ23-0AA0 - Control Board - SIEMENS

6SN1118-0DJ23-0AA0
Digital control board SIEMENS 1 axis and reference 6SN1118-0DJ23-0AA0. Digitale high performance, direct measurements. SIMODRIVE 611 DIGITAL HIGH PERFORMANCE, DIRECT MEAS. SYSTEM 1 AXIS CLOSED-LOOP CONTROL PLUG-IN NC SOFTWARE System reconditioned and tested under full load (duration test) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€420.00

6SN1118-0NH00-0AA0 - Control Board - SIEMENS

6SN1118-0NH00-0AA0
SIEMENS 2-axis control board, order number 6SN1118-0NH00-0AA0 for digital drive. SIMODRIVE 611 UNIVERSAL DIGITAL CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, OPTICAL ENCODER,CLOSED-LOOP SPEED CONTROL, ANALOGIC Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€1,120.00

6SN1118-0AA11-0AA0 - Control Board - SIEMENS

6SN1118-0AA11-0AA0
SIEMENS control board 1 reference axis 6SN1118-0AA11-0AA0 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 1 AXIS, FOR FEED DRIVES WITH 1FT5. This module SIEMENS 6SN1118-0AA11-0AA0 is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€110.00

6SN1118-0NH00-0AA1 - Control Board - SIEMENS

6SN1118-0NH00-0AA1
SIEMENS 2-axis control board, order number 6SN1118-0NH00-0AA1 for digital drive. SIMODRIVE 611 UNIVERSAL DIGITAL CLOSED-LOOP CONTROL PLUG-IN UNIT, 2 AXES, OPTICAL ENCODER,CLOSED-LOOP SPEED CONTROL, ANALOGIC Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€860.00

6SN1118-0NH11-0AA0 - Control Board - SIEMENS

6SN1118-0NH11-0AA0
SIEMENS control board, 2-axis, reference 6SN1118-0NH11-0AA0 for digital drive. SIMODRIVE 611 UNIVERSAL E HR 2-AXIS CONTROL LOOP BLOCK ENCODER INCREMENTAL PETROL / COS 1 ENCODER VALUE ABSOLUTE VALUE ENDAT VALUE / TORQUE SETPOINT OPTION REQUIRED MOTION CONTROL WITH PROFIBUS DP (V2) 6SN1114-0NB01-0AA0 Card refurbished and tested at full charge.
€955.00

6SN1121-0BA11-0AA0 - Control Board - SIEMENS

6SN1121-0BA11-0AA0
SIEMENS control board with 2 reference axes 6SN1121-0BA11-0AA0 for spindle drive. SIMODRIVE 611-A CLOSED LOOP CLOSURE CONTROL UNIT FOR MAIN SPINDLE DRIVE WITH 1PH BASIC VERSION Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€1,240.00

6SN1121-0BA11-0AA1 - Control Board - SIEMENS

6SN1121-0BA11-0AA1
SIEMENS control board 2 reference axes 6SN1121-0BA11-0AA1 for spindle drive. SIMODRIVE 611-A CLOSED LOOP CLOSURE CONTROL UNIT FOR MAIN SPINDLE DRIVE WITH 1PH Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€2,160.00

UD75 - CTNet Interface Card - LEROY SOMER

UD75
This LEROY SOMER UD75 reference interface board is part of the UNIDRIVE range. May be marketed under the brand name CONTROL TECHNIQUES or EMERSON. This interface card LEROY SOMER UD75 is available to you in standard supply or exchange to replace your defective equipment and has a warranty.
€980.00

UD52 - SIN-COS Option Module - CONTROL TECHNIQUES

UD52
This UD52 CONTROL TECHNIQUES option module is a SIN-COS encoding interface for the UNIDRIVE range. The UD52 operates with encoders having 256, 512, 1024, 2048 or 4096 lines per revolution and has an operating frequency of 102.4 kHz. This option module is at your disposal in standard supply or exchange to replace your defective equipment and has a warranty.
€920.00

6SN1118-0AE11-0AA1 - Control board - SIEMENS

6SN1118-0AE11-0AA1
SIEMENS control board 2 reference axes 6SN1118-0AE11-0AA0 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 2 AXES, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€420.00

6SN1114-0AA01-0AA0 - Option Card - SIEMENS

6SN1114-0AA01-0AA0
Optional expansion card for SIEMENS 6SN1114-0AA01-0AA0 reference terminals for SIMODRIVE 611 card. 6SN1114-0AA01-0AA0 SIEMENS SIMODRIVE 611-A ADJUSTMENT BGR F. POWER MODULE, COMFORT INTERFACE For withdrawable units 6SN1118-0AA11-0AA0 ..... 1 Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power...
€40.00

6SN1114-0NB00-0AA1 - Option Card - SIEMENS

6SN1114-0NB00-0AA1
Optional expansion card for SIEMENS 6SN1114-0NB00-0AA1 reference terminals for SIMODRIVE 611 card. SIMODRIVE 611 UNIVERSAL OPT. PLUG-IN UNIT PROFIBUS DP, PROFIBUS UNIT DP-NORM- SLAVE FOR CYCLIC AND ACYCLIC DATA EXCHANGE Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€140.00

6SN1114-0NB00-0AA2 - Option Card - SIEMENS

6SN1114-0NB00-0AA2
Optional expansion card for SIEMENS 6SN1114-0NB00-0AA2 reference terminals for SIMODRIVE 611 card. SIMODRIVE 611 UNIVERSAL OPT. PLUG-IN UNIT PROFIBUS DP, PROFIBUS UNIT DP-NORM- SLAVE FOR CYCLIC AND ACYCLIC DATA EXCHANGE Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€110.00

6SN1114-0AA02-0AA0 - Option Card - SIEMENS

6SN1114-0AA02-0AA0
Optional expansion card for SIEMENS 6SN1114-0AA02-0AA0 reference terminals for SIMODRIVE 611 card. HSA-OPTION VSA 6SN1114-0AA02-0AA0 - SIMODRIVE 611-A OPTION MODULE MAIN SPINDLE FUNCTIONS FOR LOAD CONTROL, ENHANCED INTERFACE Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power supply.
€530.00

6SN1114-0NB01-0AA1 - Option Card - SIEMENS

6SN1114-0NB01-0AA1
Optional expansion card for SIEMENS 6SN1114-0NB01-0AA1 reference terminals for SIMODRIVE 611 card. SIMODRIVE 611 U OPTION MODULE MOTION CONTROL W. PROFIBUS DP SYNCHRONOUS STAND. SLAVE UP TO 2 AXES ONLY FOR EXCHANGE OF CYCLIC AND ACYCLIC DATA. Card refurbished and tested under full load (test duration) on 611D bench coupled to 1 drive and 1 SIEMENS power...
€345.00

A16B-2100-0200 - Control board - FANUC

A16B-2100-0200
This FANUC reference board A16B-2100-0200 is designed to equip the FANUC A06B-6100-H002 drives. This FANUC control board is used to control the A06B-6100-H002 drive installed on FANUC RJ3 robots. This card A16B-2100-0200 is at your disposal to replace your defective equipment and has a guarantee of operation adapted to your needs.
€1,560.00

UD78 - Servo option module - CONTROL TECHNIQUES

UD78
This servo option module CONTROL TECHNIQUES reference UD78 is an interface for the UNIDRIVE range. The UD78 can only be used with disks equipped with version 3 (or later) software. (The 0.50 parameter indicates the software version.) This option module CONTROL TECHNIQUES is at your disposal in supply to replace your defective equipment and has a guarantee.
€1,820.00

UD53 - Resolver interface option module - CONTROL TECHNIQUES

UD53
This UD53 CONTROL TECHNIQUES option module is a resolver module interface for the UNIDRIVE range. The optional small module UD53 Resolver is an interface module to be installed in a Unidrive. This option module UD53 is available to you in standard supply or exchange to replace your defective equipment and has a warranty
€1,120.00

6SC6100-0GA00 - Power supply board - SIEMENS

6SC6100-0GA00
This SIEMENS power supply board and 6SC6100-0GA00 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GA00 SIEMENS SIMODRIVE 610/210 VSA FBG. FEEDING AND MONITORING This 6SC6100-0GA00 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board refurbished and tested on...
€850.00

6SC6100-0GB11 - Power supply board - SIEMENS

6SC6100-0GB11
This SIEMENS power supply board and 6SC6100-0GB11 reference is used for the SIMODRIVE 610/210 range. 6SC6100-0GB11 SIEMENS SIMODRIVE 610/210 VSA FBG ELECTRICAL POWER SUPPLY AND VOLTAGE LIMITATION This 6SC6100-0GB11 power supply board is at your disposal to replace your defective system and has a guarantee adapted to your needs Power supply board...
€520.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71
This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.
€410.00

JUSP-ACP05JAB - Converter - YASKAWA

JUSP-ACP05JAB
This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAB. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.
€1,180.00

6SC6110-0GA01 - Monitoring module - SIEMENS

6SC6110-0GA01
This SIEMENS monitoring and reference module 6SC6110-0GA01 is used for the SIMODRIVE 611 range. 6SC6110-0GA01 : SIEMENS SIMODRIVE 611. Monitoring module This 6SC6110-0GA01 monitoring module is at your disposal to replace your defective system and has a guarantee adapted to your needsModule reconditioned and tested on SIEMENS bench.
€470.00

6SC6110-0GA00 - Monitoring module - SIEMENS

6SC6110-0GA00
This SIEMENS monitoring and reference module 6SC6110-0GA00 is used for the SIMODRIVE 611 range. 6SC6110-0GA00 : SIEMENS SIMODRIVE 611. Monitoring module This 6SC6110-0GA00 monitoring module is at your disposal to replace your defective system and has a guarantee adapted to your needsModule reconditioned and tested on SIEMENS bench.
€1,835.00

JUSP-ACP05JAA + JUSP-ACPCB05JAA - Converter - YASKAWA

JUSP-ACP05JAA + JUSP-ACPCB05JAA
This YASKAWA converter is composed of 2 modules: JUSP-ACP05JAA + JUSP-ACPCB05JAA. It is used in CACR-SV3AAA servopacks, CACR-UP6AAC, CACR-SK16AAC, CACR-UP20AAA. Capacity of 5A. This YASKAWA converter is at your disposal to replace your defective equipment. It is sold with a guarantee of operation adapted to your needs.
€920.00

8AC122.60-2 - Plug-in module - B&R

8AC122.60-2
This B&R plug-in module is part number 8AC122.60-2. It corresponds to the ACOPOS range for servo drives of the same range. Encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€130.00

8AC120.60-1 - Plug-in module - B&R

8AC120.60-1
This B&R plug-in module is part number 8AC120.60-1. It corresponds to the ACOPOS range for servo drives of the same range. EnDat 2.1 encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€125.00

8AC112.60-1 - Plug-in module - B&R

8AC112.60-1
This B&R plug-in module is part number 8AC112.60-1. It corresponds to the ACOPOS range for servo drives of the same range. POWERLINK ethernet interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€225.00

8AC110.60-2 - Plug-in module - B&R

8AC110.60-2
This B&R plug-in module is part number 8AC110.60-2. It corresponds to the ACOPOS range for servo drives of the same range. CAN interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€155.00

8AC140.61-3 - Plug-in module - B&R

8AC140.61-3
This B&R plug-in module is part number 8AC140.61-3. It corresponds to the ACOPOS range for servo drives of the same range. CPU interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€474.00

8AC123.60-1 - Plug-in module - B&R

8AC123.60-1
This B&R plug-in module is part number 8AC123.60-1. It corresponds to the ACOPOS range for servo drives of the same range. Incremental encoder and SSI absolute encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€465.00

8AC130.60-1 - Plug-in module - B&R

8AC130.60-1
This B&R plug-in module is part number 8AC130.60-3. It corresponds to the ACOPOS range for servo drives of the same range. Digital mixed module for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€220.00

8AC131.60-1 - Plug-in module - B&R

8AC131.60-1
This B&R plug-in module is part number 8AC131.60-3. It corresponds to the ACOPOS range for servo drives of the same range. Mixed module for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€460.00

8AC110.60-3 - Plug-in module - B&R

8AC110.60-3
This B&R plug-in module is part number 8AC110.60-3. It corresponds to the ACOPOS range for servo drives of the same range. CAN interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€470.00

8AC114.60-2 - Plug-in module - B&R

8AC114.60-2
This B&R plug-in module is part number 8AC110.60-3. It corresponds to the ACOPOS range for servo drives of the same range. POWERLINK V2 interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€360.00

8AC121.60-1 - Plug-in module - B&R

8AC121.60-1
This B&R plug-in module is part number 8AC121.60-1. It corresponds to the ACOPOS range for servo drives of the same range. HIPERFACE interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€190.00

8AC122.60-3 - Plug-in module - B&R

8AC122.60-3
This B&R plug-in module is part number 8AC122.60-3. It corresponds to the ACOPOS range for servo drives of the same range. Resolver interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€560.00

8AC125.60-1 - Plug-in module - B&R

8AC125.60-1
This B&R plug-in module is part number 8AC122.60-3. It corresponds to the ACOPOS range for servo drives of the same range. BiSS encoder interface (Mode C) for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€220.00

8AC125.60-2 - Plug-in module - B&R

8AC125.60-2
This B&R plug-in module is part number 8AC122.60-2. It corresponds to the ACOPOS range for servo drives of the same range. BiSS encoder interface (Mode C) for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€220.00

8AC125.61-2 - Plug-in module - B&R

8AC125.61-2
This B&R plug-in module is part number 8AC125.61-2. It corresponds to the ACOPOS range for servo drives of the same range. BiSS encoder interface (Mode C) for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€220.00

8AC126.60-1 - Plug-in module - B&R

8AC126.60-1
This B&R plug-in module is part number 8AC125.61-2. It corresponds to the ACOPOS range for servo drives of the same range. EnDat 2.2 encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€2,305.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS
This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,250.00

KI-KEYPAD - Console - CONTROL TECHNIQUES

KI-KEYPAD
This KI-KEYPAD console and Control Techniques brand is a programming console from the UNIDRIVE range. Console compatible with M600, M700 and HS70 drives. This KI-KEYPAD Control techniques console is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€190.00

SM-KEYPAD - Console - CONTROL TECHNIQUES

SM-KEYPAD
This SM-KEYPAD console and Control Techniques brand is a programming console from the UNIDRIVE range. Console with LED display, Unidrive SP drive option. It indicates the status of the drive, the value and the number of the selected parameter. This SM-KEYPAD Control techniques console is at your disposal to replace your defective equipment and has a...
€110.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus
This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€490.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen
This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€315.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET
This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€215.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET
This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€360.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION
This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€995.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus
This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver
This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€780.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP
This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus
This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...
€210.00

UD50 - option module - CONTROL TECHNIQUES

UD50
This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee
€389.00

UD51 - option module - CONTROL TECHNIQUES

UD51
This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee
€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70
This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee
€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications
This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€180.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1
This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

UD73 - Option module - CONTROL TECHNIQUES

UD73
This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee
€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus
This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€310.00

SM-Encoder Output Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Output Plus
This SM-Encoder Output Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Output Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€303.00

SM-I/O 32 - Interface module - CONTROL TECHNIQUES

SM-I/O 32
This SM-I/O 32 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O 32 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€205.00

SM-I/O Lite - Interface module - CONTROL TECHNIQUES

SM-I/O Lite
This SM-I/O Lite interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O Lite Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€280.00

SM-I/O Timer - Interface module - CONTROL TECHNIQUES

SM-I/O Timer
This SM-I/O Timer interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O Timer Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€440.00

SM-I/O Pelv - Interface module - CONTROL TECHNIQUES

SM-I/O Pelv
This SM-I/O Pelv interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O Pelv Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€298.00

SM-I/O 120V - Interface module - CONTROL TECHNIQUES

SM-I/O 120V
This SM-I/O 120V interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O 120V Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€295.00

SM-I/O 24V Protected - Interface module - CONTROL TECHNIQUES

SM-I/O 24V Protected
This interface module SM-I/O 24V Protected from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O 24V Protected Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,345.00

SM-Register - Interface module - CONTROL TECHNIQUES

SM-Register
This interface module SM-Register from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Register Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€300.00

SM-INTERBUS - Interface module - CONTROL TECHNIQUES

SM-INTERBUS
This interface module SM-INTERBUS from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-INTERBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€520.00

SM-CAN - Interface module - CONTROL TECHNIQUES

SM-CAN
This interface module SM-CAN from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CAN Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€930.00

SM-Sercos - Interface module - CONTROL TECHNIQUES

SM-Sercos
This interface module SM-Sercos from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Sercos Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€305.00

SM-LON - Interface module - CONTROL TECHNIQUES

SM-LON
This interface module SM-LON from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-LON Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€310.00

SM-EtherCAT - Interface module - CONTROL TECHNIQUES

SM-EtherCAT
This interface module SM-EtherCAT from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-EtherCAT Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€300.00

SM-SLM - Interface module - CONTROL TECHNIQUES

SM-SLM
This interface module SM-SLM from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-SLM Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€290.00

SMARTCARD 8KB - Backup Card - CONTROL TECHNIQUES

SMARTCARD 8KB
This SMARTCARD 8KB and Control techniques brand backup card is a card that allows you to save the parameters of the drive. Compatible with Unidrive SP drives. This SMARTCARD 8KB Control techniques memory card is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€99.00

SI-Ethernet - Interface module - CONTROL TECHNIQUES

SI-Ethernet
This SI-Ethernet interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-Ethernet Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€3,200.00

SI-Applications Plus - Interface module - CONTROL TECHNIQUES

SI-Applications Plus
This SI-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M700 drives This SI-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€520.00

SI-Safety - Interface module - CONTROL TECHNIQUES

SI-Safety
This SI-Safety interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M600, M700 drives This SI-Safety Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€520.00

SI-PROFINET - Interface module - CONTROL TECHNIQUES

SI-PROFINET
This SI-PROFINET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400,M600, M700 drives This SI-Safety Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€935.00

SI-EtherCAT - Interface module - CONTROL TECHNIQUES

SI-EtherCAT
This SI-EtherCAT interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400,M600, M700 drives This SI-EtherCAT Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€625.00

SI-CANopen - Interface module - CONTROL TECHNIQUES

SI-CANopen
This SI-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400,M600, M700 drives This SI-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€530.00

SI-DeviceNet - Interface module - CONTROL TECHNIQUES

SI-DeviceNet
This SI-DeviceNet interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400,M600, M700 drives This SI-DeviceNet Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€540.00

SI-Encoder - Interface module - CONTROL TECHNIQUES

SI-Encoder
This SI-Encoder interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M600, M700 drives This SI-Encoder Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€465.00

SI-Universal Encoder - Interface module - CONTROL TECHNIQUES

SI-Universal Encoder
This SI-Universal Encoder interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M600, M700 drives This SI-Universal Encoder Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€385.00

SI-I/O - Interface module - CONTROL TECHNIQUES

SI-I/O
This SI-I/O interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400,M600, M700 drives This SI-I/O Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€460.00

8AC122.60-1 - Plug-in module - B&R

8AC122.60-1
This B&R plug-in module is part number 8AC122.60-1. It corresponds to the ACOPOS range for servo drives of the same range. Incremental encoder and SSI absolute encoder interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€145.00

DEH11B - Option card - SEW

DEH11B
This SEW DEH11B option card is part of the MOVIDRIVE MDX60B/61B range. HIPERFACE encoder card: • HIPERFACE® encoders • AC 1 VSS sin/cos encoders • TTL encoders with complemented channels • Encoders with signal level according to RS422 This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€125.00

DFE33B - Option card - SEW

DFE33B
This SEW DFE33B option card is part of the MOVIDRIVE MDX60B/61B range. Field bus interface DFE33B EtherNet/IP and Modbus/TCP This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€1,510.00

DFI21B - Option card - SEW

DFI21B
This SEW DFI21B option card is part of the MOVIDRIVE MDX60B/61B range. InterBus FO fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€80.00

DFP21B - Option card - SEW

DFP21B
This SEW DFP21B option card is part of the MOVIDRIVE MDX60B/61B range. DFP21B fieldbus interface for PROFIBUS DP-V1 This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€59.00

DIP11B - Option card - SEW

DIP11B
This SEW DIP11B option card is part of the MOVIDRIVE MDX60B/61B range. SSI encoder interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€143.00

7CX436.50-1 - I/O module - B&R

7CX436.50-1
This B&R I/O module bears the reference 7CX436.50-1. It corresponds to the Compact I/O range. CAN communication, 12 inputs, 12 outputs. B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€670.00

7CX408.50-1 - I/O module - B&R

7CX408.50-1
This B&R I/O module bears the reference 7CX408.50-1. It corresponds to the Compact I/O range. CAN communication, 16 Inputs, 16 Outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€750.00

7XX408.50-1 - I/O module - B&R

7XX408.50-1
This B&R I/O module bears the reference 7XX408.50-1. It corresponds to the Compact I/O range. X2X communication, 16 Inputs , 16 Outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€1,000.00

7XX410.50-1 - I/O module - B&R

7XX410.50-1
This B&R I/O module bears the reference 7XX410.50-1. It corresponds to the Compact I/O range. X2X communication, 3 inputs, 3 outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€400.00

7XX412.50-1 - I/O module - B&R

7XX412.50-1
This B&R I/O module bears the reference 7XX412.50-1. It corresponds to the Compact I/O range. X2X communication, 2 inputs, 16 outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€400.00

7XX415.50-K02 - I/O module - B&R

7XX415.50-K02
This B&R I/O module bears the reference 7XX415.50-K02. It corresponds to the Compact I/O range. X2X communication, 16 inputs, 8 outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€1,015.00

7XX426.50-1 - I/O module - B&R

7XX426.50-1
This B&R I/O module bears the reference 7XX426.50-1. It corresponds to the Compact I/O range. X2X communication, 9 inputs, 11 outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€400.00

7XX436.50-1 - I/O module - B&R

7XX436.50-1
This B&R I/O module bears the reference 7XX436.50-1. It corresponds to the Compact I/O range. X2X communication, 12 inputs, 12 outputs.  B&R compact module reconditioned and tested on a manufacturer's test bench (100% test).
€400.00

DER11B - Option card - SEW

DER11B
This SEW DER11B option card is part of the MOVIDRIVE MDX60B/61B range. Resolver/HIPERFACE card. This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€385.00

DFI11B - Option card - SEW

DFI11B
This SEW DFI11B option card is part of the MOVIDRIVE MDX60B/61B range. InterBus fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€160.00

DFD11B - Option card - SEW

DFD11B
This SEW DFD11B option card is part of the MOVIDRIVE MDX60B/61B range. DeviceNet fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€180.00

DFC11B - Option card - SEW

DFC11B
This SEW DFC11B option card is part of the MOVIDRIVE MDX60B/61B range. Can/CANopen fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€980.00

DFE11B - Option card - SEW

DFE11B
This SEW DFE11B option card is part of the MOVIDRIVE MDX60B/61B range. Ethernet fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€700.00

DFE12B - Option card - SEW

DFE12B
This SEW DFE12B option card is part of the MOVIDRIVE MDX60B/61B range. Ethernet fieldbus interface This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€770.00

DIO11B - Option card - SEW

DIO11B
This SEW DIO11B option card is part of the MOVIDRIVE MDX60B/61B range. I/O expansion card This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€250.00

DRS11B - Option card - SEW

DRS11B
This SEW DRS11B option card is part of the MOVIDRIVE MDX60B/61B range. Synchronization card This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€800.00

DHP11B - Option card - SEW

DHP11B
This SEW DHP11B option card is part of the MOVIDRIVE MDX60B/61B range. MOVI-PLC basic programmable control card This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€700.00

DFE32B - Option card - SEW

DFE32B
This SEW DFE32B option card is part of the MOVIDRIVE MDX60B/61B range. Card PROFINET/IO This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€465.00

8AC110.60-1 - Plug-in module - B&R

8AC110.60-1
This B&R plug-in module is part number 8AC110.60-1. It corresponds to the ACOPOS range for servo drives of the same range. CAN interface for installation in ACOPOS servo drives B&R module reconditioned and tested on a manufacturer's test bench (100% test).
€210.00

6SN1118-0BK11-0AA0 - Control board - SIEMENS

6SN1118-0BK11-0AA0
SIEMENS control board 2 reference axes 6SN1118-0BK11-0AA0 for digital drive. SIMODRIVE 611-A CLOSED-LOOP PLUG-IN CONTROL UNIT, 2 AXES, FOR FEED DRIVES WITH 1FT5, STANDARD INTERFACE Card reconditioned and tested under full load (test duration) on bench 611D coupled with 1 drive and 1 SIEMENS power supply.
€1,150.00

DEU21B - Option card - SEW

DEU21B
This SEW DEU21B option card is part of the MOVIDRIVE MDX60B/61B range. Multicoder card This SEW option is at your disposal to replace your defective equipment and has an appropriate guarantee.
€1,450.00