Leave us a message.


Sorry, we are not available at the moment. Send us a message and we will get back to you soon.

Leave us a message.

Cards / Boards

Active filters

UD75 - CTNet Interface Card - LEROY SOMER

UD75
This LEROY SOMER UD75 reference interface board is part of the UNIDRIVE range. May be marketed under the brand name CONTROL TECHNIQUES or EMERSON. This interface card LEROY SOMER UD75 is available to you in standard supply or exchange to replace your defective equipment and has a warranty.
€980.00

UD52 - SIN-COS Option Module - CONTROL TECHNIQUES

UD52
This UD52 CONTROL TECHNIQUES option module is a SIN-COS encoding interface for the UNIDRIVE range. The UD52 operates with encoders having 256, 512, 1024, 2048 or 4096 lines per revolution and has an operating frequency of 102.4 kHz. This option module is at your disposal in standard supply or exchange to replace your defective equipment and has a warranty.
€920.00

UD78 - Servo option module - CONTROL TECHNIQUES

UD78
This servo option module CONTROL TECHNIQUES reference UD78 is an interface for the UNIDRIVE range. The UD78 can only be used with disks equipped with version 3 (or later) software. (The 0.50 parameter indicates the software version.) This option module CONTROL TECHNIQUES is at your disposal in supply to replace your defective equipment and has a guarantee.
€1,820.00

UD53 - Resolver interface option module - CONTROL TECHNIQUES

UD53
This UD53 CONTROL TECHNIQUES option module is a resolver module interface for the UNIDRIVE range. The optional small module UD53 Resolver is an interface module to be installed in a Unidrive. This option module UD53 is available to you in standard supply or exchange to replace your defective equipment and has a warranty
€1,120.00

UD71 - Communications interface module - CONTROL TECHNIQUES

UD71
This CONTROL TECHNIQUES communication interface module UD71 is a module for the UNIDRIVE range. The UD71 provides the ability to read and write values in the UNIDRIVE drive parameters and can act as a slave module. This CONTROL TECHNIQUES interface module is at your disposal to replace your defective equipment and has a warranty.
€410.00

SI-PROFIBUS - Interface module - CONTROL TECHNIQUES

SI-PROFIBUS
This SI-PROFIBUS interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with M200, M300, M400, M600, M700 drives This SI-PROFIBUS Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€1,250.00

SM-Applications Plus - Interface module - CONTROL TECHNIQUES

SM-Applications Plus
This SM-Applications Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€490.00

SM-CANopen - Interface module - CONTROL TECHNIQUES

SM-CANopen
This SM-CANopen interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-CANopen Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€315.00

SM-DEVICENET - Interface module - CONTROL TECHNIQUES

SM-DEVICENET
This SM-DEVICENET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-DEVICENET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€215.00

SM-ETHERNET - Interface module - CONTROL TECHNIQUES

SM-ETHERNET
This SM-ETHERNET interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-ETHERNET Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€360.00

SM-EZMOTION - Interface module - CONTROL TECHNIQUES

SM-EZMOTION
This SM-EZMOTION interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Mentor MP drives. This SM-EZMOTION Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€995.00

SM-I/O plus - Interface module - CONTROL TECHNIQUES

SM-I/O plus
This SM-I/O plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

SM-Resolver - Interface module - CONTROL TECHNIQUES

SM-Resolver
This SM-Resolver interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Resolver Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€780.00

SM-PROFIBUS DP - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP
This SM-PROFIBUS DP interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

SM-Universal Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Universal Encoder Plus
This SM-Universal Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Universal Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to...
€210.00

UD50 - option module - CONTROL TECHNIQUES

UD50
This CONTROL TECHNIQUES option module reference UD50 is an I/O module interface for the UNIDRIVE range. The small optional UD50 module is an interface module to be installed in a Unidrive. This UD50 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee
€389.00

UD51 - option module - CONTROL TECHNIQUES

UD51
This CONTROL TECHNIQUES option module reference UD51 is a encoder module interface for the UNIDRIVE range. The small optional UD51 module is an interface module to be installed in a Unidrive. This UD51 option module is at your disposal in supply or in standard exchange to replace your defective equipment and has a guarantee
€195.00

UD70 - Option module - CONTROL TECHNIQUES

UD70
This CONTROL TECHNIQUES option module reference UD70 is a module for the UNIDRIVE range The UD70 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee
€590.00

SM-Applications - Interface module - CONTROL TECHNIQUES

SM-Applications
This SM-Applications interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Applications Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€180.00

SM-PROFIBUS DP-V1 - Interface module - CONTROL TECHNIQUES

SM-PROFIBUS DP-V1
This SM-PROFIBUS DP-V1 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-PROFIBUS DP-V1 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€195.00

UD73 - Option module - CONTROL TECHNIQUES

UD73
This CONTROL TECHNIQUES option module reference UD73 is a module for the UNIDRIVE range The UD73 is a compact microcomputer contained in a large option module for easy installation in any size Unidrive. This CONTROL TECHNIQUES interface module is available as a supply to replace your defective equipment and has a guarantee
€1,960.00

SM-Encoder Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Plus
This SM-Encoder Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€310.00

SM-Encoder Output Plus - Interface module - CONTROL TECHNIQUES

SM-Encoder Output Plus
This SM-Encoder Output Plus interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-Encoder Output Plus Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€303.00

SM-I/O 32 - Interface module - CONTROL TECHNIQUES

SM-I/O 32
This SM-I/O 32 interface module from Control Techniques is a programming console from the UNIDRIVE range. Module compatible with Unidrive SP, Quantum MP, Digitax ST, Mentor MP drives. This SM-I/O 32 Control techniques interface module is at your disposal to replace your defective equipment and has a guarantee adapted to your needs.
€205.00